Stogierob
Chronic DIYer
I cannot confirm if the oiler is working or clogged. The gas/oiler tank is off the saw at the moment. I’ve put some seafoam into the tank (both sides) to clean it out, and hopefully clear up any blockage. When I press the oiler plunger, their is a bit of oil that will ooze from around the plunger, but nothing comes out the nozzle at the bottom of the tank.
I’ve got the IPL for the saw and i know the plunger is a three part assembly. If that needs to come out, I could use some guidance so I’m not waiting for more parts to be delivered to reassemble the saw.
Thanks!
Rob
I’ve got the IPL for the saw and i know the plunger is a three part assembly. If that needs to come out, I could use some guidance so I’m not waiting for more parts to be delivered to reassemble the saw.
Thanks!
Rob