You should try a popup in that saw, Randy!
Mastermind Meets The MS661 Again
- Thread starter Mastermind
- Start date
Help Support Arborist Forum:
Mastermind
Work Saw Specialist
Hell of it.......that is a new 33RSC. 
Mastermind
Work Saw Specialist
Not in my saws they don'tI'm ok with it........popups suck.
Mastermind
Work Saw Specialist
Yeah they do.
You're just too hard headed to see that.
You're just too hard headed to see that.
Lol…you guys
Mastermind
Work Saw Specialist
I love "The Bradley".
He can't see that either.
He can't see that either.
Mastermind
Work Saw Specialist
I never did get a real good "looking" cut today......I ran a little fuel through the saw noodling a few big nasties. Then filed the chain.
Just about rolled the round over on me but here's that vid.
I'm really anxious to see how the jug with the epoxied intake does. I prolly need to find a better way to hold them rounds though.
Just about rolled the round over on me
but here's that vid. I'm really anxious to see how the jug with the epoxied intake does. I prolly need to find a better way to hold them rounds though.
Any gut feelings on how it compares to your 395s?
^^Yeah, this
komatsuvarna
Arboristsite MVP
I never did get a real good "looking" cut today......I ran a little fuel through the saw noodling a few big nasties. Then filed the chain.
I'm really anxious to see how the jug with the epoxied intake does. I prolly need to find a better way to hold them rounds though.
That one looks good!
I curious how to epoxied jug turns out....
any thoughts on just your muffler mod by itself?
Mastermind
Work Saw Specialist
I'm having a heck of a time keeping a good chain in this weather. There is ice on all the wood here, and after a cut or two, the chain is blunt.
I'll do my best to test this next saw with just a modded muffler, and with a couple of different jugs.
I have two more in route, so the MS661 will get plenty more testing here.
Brad, I've really not been able to get any serious time on these saws......but I think they are gonna be a very popular saw. How it compares to one of my 395s.......I still don't think it will be able to touch it.
I do a 395 with 100/120/80
I have a 661 jug sitting here with those exact numbers.......we shall see.
I'll do my best to test this next saw with just a modded muffler, and with a couple of different jugs.
I have two more in route, so the MS661 will get plenty more testing here.
Brad, I've really not been able to get any serious time on these saws......but I think they are gonna be a very popular saw. How it compares to one of my 395s.......I still don't think it will be able to touch it.
I do a 395 with 100/120/80
I have a 661 jug sitting here with those exact numbers.......we shall see.
spencerpaving
ArboristSite Guru
It must cut good...there was sawdust still falling from the sky from the first cut!! Booyaa!
Mastermind
Work Saw Specialist
KG441c
Keith
How bad of a whoopin will that ported 661 put on a ported 461?
Dulls fast in frozen wood.
Why don't you cart that log into the shop & let it thaw out then cart it back & make your cuts?
Trx250r180
Saw polisher
Like was said before ,the woods frozed sir ,i had the same problem once ,changed 3-4 chains before i figured it out ,same log after it warmed up cut like normal ,you are not going to get fair results till you melt the wood .
Mastermind
Work Saw Specialist
In that size wood I doubt there would be much difference.
