Mastermind worksaw's picture thread

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
75a95f39860edbe1787177d84a6b3dd6.jpg
I'll repost three here . From the left 261cm,441cm,461,and a 660 , just picked up the 461last night (that bad boy feels like it has enough compression to fire diesel fuel).
821f3d9942736793ec25f5bbea174b1c.jpg
d4e24d49c00a6299de90ad806f74c9f1.jpg
d32d1f219abfe85db317e6e0eb60d8a9.jpg
Here is a photo of the 461 next to my 460
f1a4e1b9dccdf68ce1a02b4747cc828a.jpg
Should be interesting to run the 461 against the 441


Sent from my iPhone using Tapatalk
 
I married the most perfect woman for me, my life has never been more complete.

I've also seen good men and women absolutely destroyed by their "other halves".

If your not 100% together it'll never be what it should
 
ImageUploadedByTapatalk1418052685.970886.jpg
No more Bananas in this jug will fit
The Squish has been cut, the ports now are slick
Both rings are now on, and the top is still flat
At 190psi, this 660s a cat

They say the Husqvarnas will out cut it uphill,
But no fasteners to look for when running a Stihl.

So take your blue ribbon, in the cookie contest.
My 660'll still be running long after your Hooskee has passed.
 
View attachment 385133
No more Bananas in this jug will fit
The Squish has been cut, the ports now are slick
Both rings are now on, and the top is still flat
At 190psi, this 660s a cat

They say the Husqvarnas will out cut it uphill,
But no fasteners to look for when running a Stihl.

So take your blue ribbon, in the cookie contest.
My 660'll still be running long after your Hooskee has passed.
looks like your scrench hits the plastic too when pull the spark plug
 
Don't have to change plugs much when the carb is adjusted correckally, and clean mix is used... ;)
I pull mine when milling every so often to make sure it has some color too it after long hard passes ,never can be too careful ,i pull the muffler can too make sure it is oily too ,maybe i worry to much ,it is a stihl ,it should last 4 huskies long right ?
 
I pull mine when milling every so often to make sure it has some color too it after long hard passes ,never can be too careful ,i pull the muffler can too make sure it is oily too ,maybe i worry to much ,it is a stihl ,it should last 4 huskies long right ?
I herd 6 if no millin'

IDK bout no millin'
 
We were having a discussion in the Wesco thread, and since you probably aren't reading the Wesco thread Randy, I'll poast it here.

Well,
Our 2187 lb old bull sold yesterday for $2181.00.
Hopefully he is the donor for my next pair of work boots.

I think he was old enough his sack could be used for boot bottoms.

A Word of caution Moobs, we bought a bull one time that had a broke d**k.

There is no market for broke d**k bulls.

They can't bull, and, well, there's just no 2 ways about it, it's a ****** situation.

So When you buy a bull, verify that his running gear is in working order.

We caught this watching him in the pasture... He didn't even try to be a bull anymore, he didn't act right, and it was finally observed when he relieved himself as to why he wasn't trying to be a bull.
Needless to say, we didn't get any calves from that heard that year.
 
Back
Top