brad1000s
ArboristSite Operative
Ok fellas before you start laughing at me or making fun of my saw, its because of you as to why i did this. The first mods I made were to the airfilter and carb. There is a little piece of plastic that covered the carb intake...that was removed. As well as the choke and choke rod. (holes filled with 5mm screws). Next, I did a little port work. I mostly opened up the exhaust port by cutting the top of the port to increase RPM... like a powervalve on a dirtbike. Last was the muffler. The spark screen was tossed. The muffler internals were drilled and opened up. The two little slits in the back of the muffler were closed off and hole drilled in the front of the muffler. In the end all I was after was to take a POS saw and make it cut.
"holy crap"! This thing revs like mad and i swear it cuts twice as fast as it did stock. Now i'll just see if it holds together.
"holy crap"! This thing revs like mad and i swear it cuts twice as fast as it did stock. Now i'll just see if it holds together.