BIG JAKE
Let’s go Brandon!
I have a Sandvik bar that I need help ID'ing. Says made in Sweden 511, 1786-50 1.27mm/.050" 3/8"/62 DL. What saws will this bar fit?
Thanks in advance,
Jake
Thanks in advance,
Jake
Old Sandvik catalog lists the 1786-50 as a 16" bar, 3/8 pitch, .050 gauge using a 62 dr. link chain.
For Stihl -051av, 051ave, 075ave, E30, 08S, S10, 07S
Old Sandvik catalog lists Husqvarna L77, 160s, 280cd, 1100cd so that is an Oregon D009 mount. Very common mount. It is a 16" bar .050 gauge, 3/8 pitch and uses a 60 drive link chain.Need an Id on this Sandvik numbers are 605 1669-48 .050 3/8 60 dl
Sandvik 3270-45 fits Jonsereds 50, 50s, 51, 51s, 52, 521, 45, 49sp
It's listed as a 15" bar, .325 pitch , .058 gauge using a 64 dr. link chain.
Ray,
That's some very impressive guide bar knowledge.
Check out the bars on top.
View attachment 399052
A176 sounds strange, while D176 would fit many Echo saws and more?
That's what I thought as well. Eccentric, and ModifiedMark helped me identity them.
There are subtle differences between the A176, and D176.
Is it possible those are A095 mountsCheck out the bars on top.
View attachment 399052
Is it possible those are A095 mounts
http://www.oregonchain.com.au/a095.html
Nope. The adjuster holes are too far from the stud slot.
It should be easy to determine if they have A, K or D tails by comparing the tail profiles/sizes to some known mounts....
Enter your email address to join: