Want to Sell new aftermarket cylinder cover.husqvarna 61?

[jughead500]

I have a new cylinder cover for a husqvarna 61 or possibly 281.the bolt spacing to attach it to the saw is different than the 266 xp.I tried matching this one to the ones on ebay.asking $25 shipped in the lower 48 or trade.what ya got

 

[Flat47]

What's the bolt spacing on that one there?

 

[jughead500]

Will measure in a little while

 

[jughead500]

Looks like 6 in from back hole to front hole and 4 7/8 in side to side

 

[Flat47]

I'll measure my saws and check the bolt spacing - I might be able to use this.

 

[jughead500]

Alrighty.the spacing is longer front to back than the 266xp

 

[jughead500]

Covers still available

 

[jughead500]

Looks to be the same as the 61 white cover

 

[nmurph]

I believe those measurements are the same as the 281/288. I will try to measure one for you tomorrow.

 

[jughead500]

Ok thank you i'll appreciate it

 

[treeslayer2003]

if it truly fits a 61 I may take it.

 

[jughead500]

I bought it for my uncles 266xp but the spacing is different than the 266cover I have.flat47 determined that the screw spacing was for the early 61 and maybe others.

 

[Flat47]

I bought it for my uncles 266xp but the spacing is different than the 266cover I have.flat47 determined that the screw spacing was for the early 61 and maybe others.

The key to fit is the front screw. At some point Husky moved the front screw of the top cover to behind the top left screw of the starter cover. The older saws have the front screw of the top cover in front of the top left starter cover screw.

 

[treeslayer2003]

the top screw is behind the front top starter screw on mine.

 

[jughead500]

Pretty sure this one is behind thestarter cover screw.the 266 screws look like they line up.

 

[nmurph]

Here are the measurements on an OEM 288 top cover-