Granberg saw miller
ArboristSite Lurker
My new (used) ms880 has a 404 pitch bar and chain and when I first tested it I used it for ripping 2 foot diameter by 2 foot long birch logs but it will only cut if I pull the powerhead and spurs away from the wood otherwise the chain grabs too hard and stops moving. Will it work better if I only rev up the saw halfway rather than all the way or should I try and track down a 3/8 pitch bar and chain that will fit an ms880 bar mount and get a 3/8 pitch drive sprocket from ebay that fits an ms880?