Here is what is on the floor again that I need to put on shelves again
Sent from my LG-D800 using Tapatalk
thanks, I think thats what i kinda heard before, its just a GTG saw wasnt sure how it would work running in 8 to 10" racing cantsHere's a quote that I found on another forum.
"Until you get into the ~80cc or 6+HP range, an 8 pin will slow you down 9 times out of 10. And even on my 84cc ~6.5HP saw, I still run a 7pin. I just file the rakers a little more aggressively"
Even though it is a 74 cc saw I do not think it can keep the rpms up. The only way that I would run and 8 pin if it was converted to a .325. I think doing that would loose some of the persona of a 245 though...
Mark
the clutch cover for an xl-12 makes a decent replacement for a poulan 361
yes of coarse I am tracking these ) also the recoil spring is the same as well.hey acorn,
you tracking these?
1. ...homelite super 240 coil and put it in a poulan 2000 (is this electronic or points coil?)...
2. ...Spike bumper for XL 12 /SXL will match right up to a 245 306...
3. ...clutch cover for an xl-12 makes a decent replacement for a poulan 361...
4. ...those two saws (xl-12 & poulan 361) plus the SXLAO will use the same points too, if they're all Wico...
the recoil spring for what saws?yes of coarse I am tracking these ) also the recoil spring is the same as well.
Xl 12 SXL to 361 400 etc.the recoil spring for what saws?
thanks, I think thats what i kinda heard before, its just a GTG saw wasnt sure how it would work running in 8 to 10" racing cants
on a like note, i have an 024 that had a factory 8 pin .325 when I ordered bar, chain, and rim they sent a 7 pin .325
it pulls harder than it did with the little 8 pin and still rpm's good
hey acorn,
you tracking these?
1. ...homelite super 240 coil and put it in a poulan 2000 (is this electronic or points coil?)...
2. ...Spike bumper for XL 12 /SXL will match right up to a 245 306...
3. ...clutch cover for an xl-12 makes a decent replacement for a poulan 361...
4. ...those two saws (xl-12 & poulan 361) plus the SXLAO will use the same points too, if they're all Wico...
Hi. This the right place to get a bit of help with my Poulan 306A? If not let me know and I'll move this elsewhere.
Enter your email address to join: