redunshee
Addicted to ArboristSite
Id rather have a 3700 P&C.
Nik's Poulan Thread
- Thread starter FATGUY
- Start date
Help Support Arborist Forum:
The big day is here so please be safe and enjoy
Why is that, with the 4000 you get more power with the same weight?
Less than 3 cc difference between them, only thing that is better is the air filter cover on the 4000, the 3700 is very under rated
I have had all 3.7, 3700 & 375 both not impress me & impress me. One of the 375 I have now definitely impressed me. I do believe some saws just run better than others for some reason
Sent from my iPhone using Tapatalk
Just so there is no misunderstanding I'll take a 4000 any day of the week and twice on Christmas
That's my future proofing plan for the shelf. I like to use my 4000 it's my "modern" saw. Other than the husky 350 for diddling about on little stuff
If I need a 60cc I grab the lighter 3750 380 or 3500 3.7 365. 12.8lbs and under 12lbs
If going to need more and 65cc and not much more weight then 3700 375 4000. I go to the 415 425. Reason for me selling the 375 3800 4000.
Just under 15lbs like 14.5lbs and up 4000 375 etc compared to 15 and half lbs 415 425.
375 with chain brake same as 415 425 in weights.
poulan weights http://chainsawrepair.createaforum.com/chain-saw-weights/poulan-pho-weights/
If going to need more and 65cc and not much more weight then 3700 375 4000. I go to the 415 425. Reason for me selling the 375 3800 4000.
Just under 15lbs like 14.5lbs and up 4000 375 etc compared to 15 and half lbs 415 425.
375 with chain brake same as 415 425 in weights.
poulan weights http://chainsawrepair.createaforum.com/chain-saw-weights/poulan-pho-weights/
I just drop trees with my Echo cs400 cause it light and maneuverable , then cuttem up with the 3700 bow so I don't have to bend over.
Steve
Steve
I need to get my 2800 going come spring time and start running it.
Steve
Steve
redunshee
Addicted to ArboristSite
Looks like I'm gonna have to pull the carb on my 5200. After running for a few minutes, saw either idles too low, if adjusted, will idle too high. Just couldn't get it to set correctly. I looked at the carb that was on the saw when I got it, someone had already changed it to the 4200 carb. I may just rebuild it and install it and see how it run. That carb seems to be a little tighter and smoother.
Steve
Steve
Keep us updated on the saw, I will need the information in the future with my 4200 when I get it going
You know me, I'll definitely post what I find.
Steve
Steve
I should have taken the one off the saw so I could take both to work and worked on them there but had gotten discussed with the way it ran. My luck something made it past the fuel filter and got into one of the fuel circuits. I know I caught the devil getting the fuel tank cleaned with pebbles and water trying to knock off all the crusty stuff that was in the tank. I even poured aluminum acid in the tank as a final cleaning to be sure is was cleaned and flushed it for 10 minutes with hot water. Both carbs are HS168 Tillies.
Steve
Steve
Looks like someone got the 4000 p and c for 125. Anyone we know
Not me, happy with my 3700. Matter of fact, I got it out the other day just to hear it run. Didn't even cut any wood.
Steve
Steve
Then you got this 4000 for 175 right now. Guy says runs and cuts. Plus a 3400 3300 etc
Hmmmmm part them out, I just couldn't do it. Unless someone needed the parts to fix their own saw.
Hmmmmm part them out, I just couldn't do it. Unless someone needed the parts to fix their own saw.
Those look nice, rear handle looks kind of out of wac on the left one near air cleaner cover. Other than that, nice looks bunch.
Steve
Steve
Was wondering about that too.
He has a bunch of saws FS. But nothing I am interested in.
