Nik's Poulan Thread

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Here I was thinking you weren't into the exotic plastic purple clam shells. (Or is this no relation to the Wild Thing)
Man I hope someone enlighten you after that post. ;)

Not a clamshell. Mag cased pro built and runs with the husky 262 stihl 036 saws. ;)

Just 1 of probably 10-12 or more of those I have found and sold over the years.

Last pic of another one I had and sold to member here, beside a 262 I sold too.

ptabb2018d.jpgptabb2018b.jpgptabb208c.jpgptabb2018.jpgp3750262.jpgp3750cc.jpg
 
Man I hope someone enlighten you after that post. ;)

Not a clamshell. Mag cased pro built and runs with the husky 262 stihl 036 saws. ;)

Just 1 of probably 10-12 or more of those I have found and sold over the years.

Last pic of another one I had and sold to member here, beside a 262 I sold too.

View attachment 960085View attachment 960086View attachment 960087View attachment 960088View attachment 960089View attachment 960090

Ok I gotta ask. Will they really run with a 262? A 262 is a ripper of a saw. If so maaaan I gotta get me 1 of these things
 
Ok I gotta ask. Will they really run with a 262? A 262 is a ripper of a saw. If so maaaan I gotta get me 1 of these things
Yes they will cut right with the 262 and 036. Owned a 262 036 with the 3750's. They have alittle less torque in the cuts and just a hair slower.

But after cutting with 262 and 3750 all day with a friend. Setting back we talked about them. Both of us preferred the 3750 for feel and handling over the 262. For what little it gave up in cuts. Would take a stop watch to be able to see times in cut. Torque difference you can feel.

Only 262 to date that impressed me stock was the 1990 ones with K&S and 87 carb. The rest were just hype from those first year saws IMHO

This is the hotrod. The other was the later oh hum ones.

h26290.jpgks90.pngks900.JPG
 
Yes they will cut right with the 262 and 036. Owned a 262 036 with the 3750's. They have alittle less torque in the cuts and just a hair slower.

But after cutting with 262 and 3750 all day with a friend. Setting back we talked about them. Both of us preferred the 3750 for feel and handling over the 262. For what little it gave up in cuts. Would take a stop watch to be able to see times in cut. Torque difference you can feel.

Only 262 to date that impressed me stock was the 1990 ones with K&S and 87 carb. The rest were just hype from those first year saws IMHO

This is the hotrod. The other was the later oh hum ones.

View attachment 960098View attachment 960099View attachment 960100

Wow man thanks for tgat:) righto then I'll have to find 1 or 2 i know they are down here
 
Wow man thanks for tgat:) righto then I'll have to find 1 or 2 i know they are down here
Video of the 262 1990 one was in different ash piece and after rebuild too. But you can see. Forgot to strap the log in. ;)
Dry and like baseball bar hard

Then a 54cc 60cc poulan after rebuilds and a 036 I think too was all run in same wood one day.





 
Wow man thanks for tgat:) righto then I'll have to find 1 or 2 i know they are down here

The Poulan 3450,3750 and the Poulan Pro 330,380 are my favorite saw. I have a bunch of them and some parts to repair them too.


Sent from my iPhone using Tapatalk Pro
 
Yes the price is have gone nuts for sure. On another note a guy at work brought me a 306 a to get running. Someone in the family took a newer poulan after a death of a family member and left him the 306a. I told him not to be upset , he likely got the better end of the deal. Got it going already just needs some more love on tuning I think and the standard 5 lbs of gunk cleaned off of it.
 
Back
Top