For me the biggest issue is the time required to move the wood. The location of the house is another impediment, in that our driveway comes no closer that about 110 yards from the house, and we live on a steep and rocky hill. The house is a bank house and the main stove is in the basement - open to the front with a door but I can get no equipment on the front bank. So wood must be transported down to the house ( I mostly use a 4 wheel cart on the old WheelHorse), and then the splits are either stacked on the back porch (I make a wind break like in the picture below from last year), or thrown down the bank in a pile. Then I have to go down a stairs and pick them up and stack them on the lower porch. It's just a lot of time spent carrying wood, it's boring, and I find this part of the job makes my back hurt worse than the rest.
I may look into leveling a path to the lower porch, but even if I did it would require a very long drive around to get to the only possible entrance. I've spent a lot of time thinking about how to make this part of the job quicker and easier, but have not been able to come up with anything. The best could come up with was to make an elaborate wood shed that I could fill from above and unload from below - but that would be a considerable construction project.