Noodles anyone?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Mike Gott

Mike Gott

ArboristSite Guru
Joined
Mar 13, 2014
Messages
645
Location
Sumner, Iowa
2ed04ceef7a35f0e793d21f71afa35c8.jpg
6bdfee2bc1ea778f1cf6943029974a29.jpg
. Did a little cuttin today. My wife loves it when I noodle then she gets more prime bedding for her horse stalls


Sent from my iPhone using Tapatalk
 
turnkey4099
Joined
Feb 27, 2002
Messages
20,060
Location
se washington
I'm setting up two saws to noodle the big rounds off two 36" dbh Red Firs. MS441 with a 20" new chain and a 361 with a 20 or 24" chain. Spare in the truck will be my old well used but fanastic runner MS310 with 20" chain.

Should make a mountain of noodles. I'll suggest the owners offer them to some farmer. I already supplied my neighbor with a couple bags full for her chicken's nest boxes.

Harry K
 
turnkey4099
Joined
Feb 27, 2002
Messages
20,060
Location
se washington
My 440 will plug up if too much noodling and I don't clean out. Husky 55 is even worse.

Angling the saw reduces that somewhat but it also slows down the cutting. I used the 441 noodling a few months ago and things went verrry well indeed. I am tempted to buy a second clutch cover and do some judicious cutting on it to provide more chip clearance just for noodling.

Harry K
 
Wickets

Wickets

ArboristSite Lurker
Joined
Dec 9, 2015
Messages
30
Location
nj
noodles make excellent kindling.

Do you have to let that 'dry' for a period of time, or can you use it for kindling right away. Just starting out here......Ive been piling my 'scraps' but in the meantime using plow and hearth fatwood to get started

thanks
 
Oldman47

Oldman47

ArboristSite Guru
Joined
Jan 29, 2015
Messages
644
Location
Forsyth, IL
It would make decent tinder very quickly. For a slip of wood that is less than match stick thickness it doesn't take long to get very dry. You would still want kindling to go with the noodles tinder.
 
turnkey4099
Joined
Feb 27, 2002
Messages
20,060
Location
se washington
Just back from my dealer Took him the two 32" loops I rocked out. Checked on buying a second clutch cover for the 441CM to modify for more chip clearance, Seems there are two different covers available, one with a bit more clearance $67. I decided it wasn't worth it (may change my mind) and asked for a 20" skip tooth chain. I'll see if that makes any difference on chip jamming.
Harry K
 
angelo c
Joined
Dec 3, 2008
Messages
5,934
Location
Peoples Republic of North Jersey
Just back from my dealer Took him the two 32" loops I rocked out. Checked on buying a second clutch cover for the 441CM to modify for more chip clearance, Seems there are two different covers available, one with a bit more clearance $67. I decided it wasn't worth it (may change my mind) and asked for a 20" skip tooth chain. I'll see if that makes any difference on chip jamming.
Harry K
see if you can buy a cheapo one from Ebay and cut the back out for clearance.
 
Wood Doctor
Joined
Jan 10, 2008
Messages
12,558
Location
Omaha, Nebraska
I was noodle cutting some big oak rounds this past October after bucking them to length. A rancher stopped by with five big empty plastic sacks and offered me $20 if I could help him fill all of them for his horse stables. We did it and packed them tight. Some of the oak rounds were so big that I had to cut them into six blocks. My Stihl 046 worked really well, especially after removing the rubber boot on the clutch cover.

He said, "Edwin, there is nothing better than these noodles for a horse stable."
 

Latest posts

Top