Oil Mix Question

[db113]

I have a Stihl 031AV and just got a Dolmar 111.
My Stihl uses an oil-gas mix of 50:1 and I always use Stihl oil. The fuel cap on the Dolmar saw says Mix Oil + Fuel 1 + 25. That sounds like twice as much oil to gas than is required by the Stihl. Will I need to have two different gas/oil mixtures for those two saws? Or, can I just use the extra oily mix in the Stihl and still be ok. I definitely don't want to damage the Stihl but wouldn't I just get a little extra smoke when using the extra oily mix? Or, would there be potential for serious damage?
Thanks!

 

[ciscoguy01]

New oils

Mainly, the newer oils lube alot better than the older ones bro. The Spec for the 031 was actually at 40:1 with Stihl oil when they first came out, but that oil was much different from the newer oils... The Dolmar 111 is also rated at 40:1, not sure why that's on there, but if you look at the acresinternet site you'll find alot of useful info on there... I'd run them both at 40 or 50:1 and not worry a bit. I run my older saw around 50:1 with Synthetics and 93 octane. It's cheap enough for just sawing. Link below guy.

Cheers eh?

http://www.acresinternet.com/cscc.nsf/GasbyManufacturer?OpenView

BTW: Your better off posting this in the Chainsaw thread wayyyyyy down below this section. You'll get more attention dude.