Jeepsnchainsaws
ArboristSite Operative
Here is the saw your jug is going in Steve. 
I was excited at first when I saw how clean the muffler is. 
Then I saw this. 
Finding a new piston was easy, but finding cylinders are not as easy, for the public 
Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS
- Thread starter Work Saw Collector
- Start date
Help Support Arborist Forum:
Here is the saw your jug is going in Steve. I was excited at first when I saw how clean the muffler is. Then I saw this. Finding a new piston was easy, but finding cylinders are not as easy, for the public 
Jeepsnchainsaws
ArboristSite Operative
What do you think caused that?Yeah, the one I sent to ya looks a whole lot better. A little prep work and you should be good to go.
Hedgerow
HACK
Is it aluminum transfer?
And is it all around the cylinder? Or just on the exhaust side?
Jeepsnchainsaws
ArboristSite Operative
Mainly the exhaust side. It has gone through the coating in the cylinder by far. Is it nickel?
Hedgerow
HACK
A lean condition most likely caused that damage. Either from an air leak, or someone's screwdriver on the carb screws.
A straight gas situation will cause transfer all around the cylinder. Intake side too..
New SXL cylinders are on evilbay. Combine one with a me 1 13/16" piston (also on the 'bay) and you have a 57cc XL-12.
Going to put a few saws on C'list in the next few days. If you see something you like just sing out as I will ship to the 'pot belly stove crew'.
Newbys excepted
Newbys excepted
Whatcha gonna put on the list Carl?
Jeepsnchainsaws
ArboristSite Operative
Pioneer Farmsaw w/24, collector grade. Mac 10-10S w/20, 10-10 w/16, right hand start. Dayton/Poulan 245SA w/20 user grade. Pioneer 1200 w/16. Skillsaw 1645/Power Mach. 340 w/20. Wards 4.0/Remy SL-11. Husky 142. Three Echo tophandle.
Oops, forgot the Jonsered 630 and the ChinAsaw/Farm Boss
Too late in the day with the low sun angle. So, take a group pic around noon tomorrow and post 'em on C'list.
Saws have gotten too deep around here. Yikes!
cobey
Addicted to ArboristSite
anyone have coil/ignition for a echo 500 EVL?? the one diggers dad built for me
had the spark poop out i like the old saw and want to keep it going
had the spark poop out
i like the old saw and want to keep it going
You're selling the Farmsaw? I remember when you got that one. Can't believe you're selling it.
sawnami
Addicted to ArboristSite
anyone have coil/ignition for a echo 500 EVL?? the one diggers dad built for me
had the spark poop out
Nothing in my Echo pile Cobey :- (
Checked my Echo manuals and looks like the PN for the coil is 156 626-1523 0 and for the CD Ignition module PN 156 601-1523 0.
cobey
Addicted to ArboristSite
thanks Steve that was my 1st 50 cc saw, and it cut wood in the rain
cobey
Addicted to ArboristSite
i just got home from Chads, he's a good friend we ran some noisey saws, he hooked me up with a good spinner and grinder, now im set up to make chains
he showed me a couple tricks for working on 290 stihls and other stuff. thanks Chad !!!! im waiting on a guy to pick up a saw i fixed yesterday
and ill buy more fuel line and filters and stuff
and I got a 36" bar and chain for my 066
we ran some noisey saws, he hooked me up with a good spinner and grinder, now im set up to make chains he showed me a couple tricks for working on 290 stihls and other stuff. thanks Chad !!!! im waiting on a guy to pick up a saw i fixed yesterdayand ill buy more fuel line and filters and stuff
and I got a 36" bar and chain for my 066
WKEND LUMBERJAK
Addicted to ArboristSite
Good morning.
Good morning Kenneth and the rest of the clan. Be safe today and have a good one.
