sawnami
Addicted to ArboristSite
Good morning.
Here you go Steve.
http://springfield.craigslist.org/grd/4926590859.html
Sent from my SM-N910V
Here you go Steve.
http://springfield.craigslist.org/grd/4926590859.html
Sent from my SM-N910V
Good morning.
Here you go Steve.
http://springfield.craigslist.org/grd/4926590859.html
Sent from my SM-N910V
Goooood morning fellows! Super foggy here in mid Mo. Working onsite today, hoping the sun burns this fog up.
The guy I got the carb kits from yesterday wants to sell me all his Homelite and old stock parts" REAL CHEAP"!
That was my first question. How many pistons and jugs? I wouldn't mind some useable gaskets and carb kits. Good looking out Carl, thanks!Cylinders and pistons are the only good part of one of them deals. And the rare bits for the really big saws. Use a good bit of caution there grasshopper.
Quadruple like on that one. [emoji106] [emoji106] [emoji106] [emoji106]It's going to be nice today. I'm glad I have job but wished I didn't have to work for a living. So many things I could be doing outside.
It's going to be nice today. I'm glad I have job but wished I didn't have to work for a living. So many things I could be doing outside.
we deal with it all of the time, brazing cast tractor parts or welding with nickel and Peening, not a big deal if it's done right. We can even tig weld tiny areas with silica bronze rod on cast.Didn't get to go after the tractor last Saturday. But it looks like the planets are going to be in alignment for this Saturday. Nieces husband told me it has a brazing repair on the engine block. I've heard of brazing or pinning a cracked block on old farm machinery but have never seen it first hand. I sure hope it's not a problem. Anybody ever have dealings with this type of thing before?
That would be affordable even if you wee feeding me.Quadruple like on that one. [emoji106] [emoji106] [emoji106] [emoji106]
Sent from my SM-N910V
Those are just cool.First time I've seen bucking spikes for Homey Zip. There Bronze!View attachment 410995
Didn't get to go after the tractor last Saturday. But it looks like the planets are going to be in alignment for this Saturday. Nieces husband told me it has a brazing repair on the engine block. I've heard of brazing or pinning a cracked block on old farm machinery but have never seen it first hand. I sure hope it's not a problem. Anybody ever have dealings with this type of thing before?
Is that grass growing in there?Mo. Jim and I had a super mini GTG this afternoon. Helped him put a Farm Boss together seeing as how I had lots of recent experience with them.
Did a general refurb on his little Echo. Carb kit and clean up. Piston/cylinder on the way out due to overheating. Found this stuff.
View attachment 411008
Air flow was blocked badly.
Enter your email address to join: