Oklahoma,AR,MO,KS,TX GTG (Next GTG 08/27/2016 ) Fort Scott, KS

[sawnami]

Homelite Super 1050 Automatic Chain Saw - $250
http://stlouis.craigslist.org/grd/5342759651.html

Sent from my SM-N910V

 

[sawnami]

Carl, do you want me to bring my 450 to borrow parts from to check yours out with?

 

[cobey]

Morning all, messed with buddys triton 3 valve
5.4 yesterday, he had $600 in work done changing
The plugs, and every one is stuck again.....
What a peice of junk. I would REALLY like to set the whole
Thing on fire!

 

[67L36Driver]

Homelite Super 1050 Automatic Chain Saw - $250
http://stlouis.craigslist.org/grd/5342759651.html

Sent from my SM-N910V

Messaged it to Art Stolts (grassgorilla)

 

[67L36Driver]

Carl, do you want me to bring my 450 to borrow parts from to check yours out with?

I'd like to try a known good carb for sure as this one will only run on choke.

 

[awol]

Morning all, messed with buddys triton 3 valve
5.4 yesterday, he had $600 in work done changing
The plugs, and every one is stuck again.....
What a peice of junk. I would REALLY like to set the whole
Thing on fire!

Make sure you use some copper Never Seize on them boogers this time Cobey!

 

[67L36Driver]

How does ceramic from a spark plug get into the cylinder?

It was a really old CJ6 Champion.

My guess is the seal between the steel she'll and ceramic blew out and then the center electrode to vibrate and batter the ceramic apart.
I'd seen this before on a couple old Bosch plugs.

 

[sawnami]

I'd like to try a known good carb for sure as this one will only run on choke.

I'll throw her in the truck.

I'll dump the fuel and oil tanks and fill with fuel only to clean out the swapped bar oil. [emoji53]

I'm not a fan of Homelite _50 series saws. Seem pretty fragile. Gimme a C-series design any day.

 

[Homelite410]

I just got a 450. All I need is a 750 to complete the line!

 

[cobey]

Make sure you use some copper Never Seize on them boogers this time Cobey!

Still have not got any out... was hoping to get compression
Test on a few cylinders, I think this motor toast
He drove it a year with the timing chain banging
Around .... I know it will be low , but wanted to see variance between
Cylinders. When it runs it sounds like a hand full or wrenches
In the oil pan

 

[cobey]

I just got a 450. All I need is a 750 to complete the line!

Love that line of saws
I got a few 360's

 

[sawnami]

Still have not got any out... was hoping to get compression
Test on a few cylinders, I think this motor toast
He drove it a year with the timing chain banging
Around .... I know it will be low , but wanted to see variance between
Cylinders. When it runs it sounds like a hand full or wrenches
In the oil pan

Find some wintergreen oil and pour it down a small fuel line around the base of the plugs. Let it sit about 30 minutes. It's the ultimate penetrant. We've used it for diesel injectors that a 5 lb. slide hammer wouldn't budge. It liquifies the carbon but when it it evaporates, the carbon hardens up rock hard so don't wait too long.

Sent from my SM-N910V

 

[sawnami]

http://www.ebay.com/ulk/itm/331720628780

 

[jmssaws]

I'm 4 hours away,what time does it kick off? I got tons of saws I'd like to bring.

 

[Mo. Jim]

I'll throw her in the truck.

I'll dump the fuel and oil tanks and fill with fuel only to clean out the swapped bar oil. [emoji53]

I'm not a fan of Homelite _50 series saws. Seem pretty fragile. Gimme a C-series design any day.

Throw that JD twin in the truck also, I have everything to fix it. It would look good in my front room.

 

[67L36Driver]

Got the pin oaks trimmed and some on the white pine.

Time for ibuprofen and a nap.[emoji21]

 

[Homelite410]

Throw that JD twin in the truck also, I have everything to fix it. It would look good in my front room.

I know where there is an echo version fueled 2 times....

 

[sawnami]

Throw that JD twin in the truck also, I have everything to fix it. It would look good in my front room.

As that XL-15 would look good in my front room.

I'm sure you knew that one was coming Jim. [emoji6]

 

[sawnami]

I know where there is an echo version fueled 2 times....

I'm sure that one is way above my pay grade. One of those "if you have to ask you can't afford it" saws.

 

[sawnami]

Some new GTG "meat".

Sent from my SM-N910V