Old saws

[Dennis Cahoon]

Here's a 1958/59 Pioneer Model 600 6.28 cu. in. (103cc) real good shape, has great compression. Anybody interested?....make me an offer.

 

[Dennis Cahoon]

Here's a Super Wiz 66 Homelite....good compression....if interested PM me.

 

[Dennis Cahoon]

Couldn't find the Super Wiz 66 on Mike Acres site.....does anybody know what the displacement is, or what years it was built? Thanks Dennis

 

[timber]

super wiz 66

: SUPER WIZ 66

--------------------------------------------------------------------------------
MANUFACTURED BY: HOMELITE CORPORATION
PORT CHESTER, NEW YORK, U.S.A.
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED: 1965
YEAR DISCONTINUED: 1983
ENGINE DISPLACEMENT: 4.7 cu. in. (77 cc)
NUMBER OF CYLINDERS: 1
CYLINDER BORE: 2.0 in. (50.8 mm)
PISTON STROKE: 1.50 in. (38 mm)
CYLINDER TYPE: Aluminum with chrome plated bore
INTAKE METHOD: Reed valves
MANUFACTURER ADVERTISED H.P.: not advertised
WEIGHT : 22 lbs. powerhead only
OPERATOR CONFIGURATION: One Man operation
HANDLEBAR SYSTEM: Rigid
CHAIN BRAKE: none
CLUTCH: Centrifugal
DRIVE TYPE: Gear reduction
CONSTRUCTION: Die cast magnesium
MAGNETO TYPE: Phelon flywheel magneto
CARBURETOR: Tillotson HL-117C series
MAJOR REPAIR KIT: RK-88HL
MINOR REPAIR KIT: DG-5HL
AIR FILTER SYSTEM: Cellulose fiber element
STARTER TYPE: Fairbanks Morse automatic rewind
OIL PUMP: Manual
OPERATING RPM: 6,000, no load 7,500 to 8,000
IGNITION TIMING: fixed
BREAKER POINT SETTING: 0.015 in. (0.38 mm)
FLYWHEEL/COIL AIR GAP: Position is fixed
SPARK PLUG TYPE: Champion J6J
SPARK PLUG GAP: 0.025 in. (0.63 mm)
CRANKSHAFT MAIN BEARINGS: Ball and caged roller types
FUEL TANK CAPACITY:
FUEL OIL RATIO: 16:1
RECOMMENDED FUEL OCTANE: Regular
MIX OIL SPECIFICATION: Homelite two-cycle mix oil
CHAIN PITCH: 1/2 in.
CHAIN TYPE: Oregon
BAR MOUNT PATTERN: 16 link
SHORTEST GUIDE BAR SUPPLIED: 14 in. (35 cm)
LONGEST GUIDE BAR SUPPLIED: 30 in. (76 cm)
COLOUR SCHEME: Homelite metallic Blue enamel
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL

 

[Gypo Logger]

Nice looking saws. Homedelightman might be interested. I thought I had a manual for the Wiz, but it was for the Buz.
John