Oregon chain info wanted

[ErnieG]

I found this Oregon chain a few weeks ago on a Windsor bar ..I never saw rakers like these before ... they are shaped like an "L" and flat on top .
Any ideas if it's got a special purpose?
Ernie

 

[Bob Hedgecutter]

Should have some "identification" stampings on various parts of the chain that might give you a hint.
I think I have one 24"loop of that left from a trial reel.

 

[Ryan'smilling]

Looks like Oregon Vanguard chain. It's a reduced kickback design. Some guys like it. Some don't.

 

[billyboy]

I’ve seen them in the box stores, looks like a pain in the arse to file the rakers.

 

[HarleyT]

I’ve seen them in the box stores, looks like a pain in the arse to file the rakers.

Just smack them down with a hammer, or bend them down with vice grips.

 

[ErnieG]

Thanks guys for the info ...it actually cuts pretty well with the rakers the way they are .
The Stihl 2n1 takes them down just fine .
Ernie

 

[HarleyT]

I was kidding,

BTW...

 

[Square Ground]

Yep, 72V chain. The chain cuts pretty well, but designed only to offer 3/8" chisel in safety version.