KG441c
Keith
Brushape whatever became of the chain shapening stand?
Popup vs Flat Top?
- Thread starter Mastermind
- Start date
Help Support Arborist Forum:
chadihman
Addicted to ArboristSite
Here's what I'd love to know. 10,000 rpms = the piston going up and down 166 times a second. How does that friggen thing have time to flow anything?
15,000 rpms is 250 times a second.
15,000 rpms is 250 times a second.
Adirondackstihl
Flyz, Fuel & Fotos
That's gonna leave a mark
Here's what I'd love to know. 10,000 rpms = the piston going up and down 166 times a second. How does that friggen thing have time to flow anything?
15,000 rpms is 250 times a second.
The shorter the stroke the slower the piston velocity. Depending on the stroke, a saw turning 15,000 rpm may actually have a slower moving piston, than say a small block 350 at a much lower rpm.
Adirondackstihl
Flyz, Fuel & Fotos
**** you *******
KG441c
Keith
So by cutting the squish and base arent u shortening the effective stroke of the piston?
Adirondackstihl
Flyz, Fuel & Fotos
Not when you adjust port height and time area
KG441c
Keith
I got the 1st 4* but whats the last 7???? Lmao!! A few more letters needed
KG441c
Keith
So after adjusting it will be the same as starting point?
A skid mark.....that is. !!!!!
The stroke is dependent on the throw of the crank. All you're doing is changing port timing/duration.
Adirondackstihl
Flyz, Fuel & Fotos
Not necessarily. It will be wherever the builder puts it to maximize output
Mastermind
Work Saw Specialist
I'm gonna go ahead with my end of the "deal"......
No more smack talk about popops from me.
I'll try my best to check that sort of talk at the door.
Lot's of ways to skin a cat..........poor cat.
Oh Brush Ape......
I doubt you'll be welcome in September. No one likes an ass hole.
No more smack talk about popops from me.
I'll try my best to check that sort of talk at the door.
Lot's of ways to skin a cat..........poor cat.
Oh Brush Ape......
I doubt you'll be welcome in September. No one likes an ass hole.
treeslayer2003
Addicted to ArboristSite
what and were is september?
I'm gonna go ahead with my end of the "deal"......
No more smack talk about popops from me.
I'll try my best to check that sort of talk at the door.
Lot's of ways to skin a cat..........poor cat.
Oh Brush Ape......
I doubt you'll be welcome in September. No one likes an ass hole.
Good!!! You and Brad are both getting on my last nerve. To be honest I think the both of you need to quit posting for a few days, as it seems neither of you have any self control. It's getting old, even to those you may call friends.
Mastermind
Work Saw Specialist
I lost a lot of respect for you a few weeks ago Andre. I really could give two ****s less what you think.
Brush ape is climbing up ice mans ass followed by harley T in a great big circle jerk off fun...
Wanna come ???
It's called a "get up yer ass together"
Randy I'm not going to go in circles with you, you know very well what I said in that thread was to simply get it locked. If you took what I said there as reality you need help.
