This saw runs and cuts great! This saw is a truly fun to chop logs with. We do this madness to get are name out there and to support ourselves in the timber sports industry. This saw has been ported and polished for high performance cutting. The cylinder is HIGHLY modified. The intake exhaust and transfer timing has been altered. Also they have been opened up for better flow. The base of the cylinder has been decked for higher compression and to retain the gasket. The muffler has also been opened up for flow. The case was split and new 6202 skf c3 bearings were installed. The cylinder is factory OEM. I do not really want to sell this one but it time to let it go. All the features work as they should including the chain brake oil pump, kill switch, and choke. We truly appreciate the business we really do!! That being said of for some reason you are not satisfied please contact us. We get back to people very quickly with all questions. Unfortunately this saw has the ability to turn its self if a puddle of molten aluminum. So, we can not warranty a blown piston. These pro saws have no built in protection such as a rev limiter. If you choose run this saw with a dull chain wide open trust us it won't last very long. But, if the starter rope brakes or an oil cap starts to leak, we are always happy to take care of you. It will come with a used 20" 3/8" bar. This runs great on 93 pump gas 50 to 1 mix with quality oil. But, a non ethanol fuel is recommended. Please zoom in and look at the pictures carefully.
Thank You
I'm asking $600 plus the ride
