Project Stumpbroke 576xp Auto Tune

[bryanr2]

I'll probably do the grinding on it myself... But stumpy will have to assist as always... Then yell at me about not using a degree wheel and stuff... That, and he has to turn the jug for me... That chamber needs reduced, and how!!!
Hope the lower end can handle it...:msp_wink:
I'd be better off just letting him do it all...
But I'm a hack, and can't help myself...

Ol randy did a thread on mine. Mastermind meets the Dolmar 120si. The video tells all. I think it would handle it's own against the current renderings from the different manufacturers in similar displacement.

 

[Stumpys Customs]

I did a 120si in my early days of modding, just a basic woods port @ it turned out to be very torquey for it's size. I'd like to be turned loose on one now:msp_wink: just sayin:msp_biggrin:

 

[Hedgerow]

I did a 120si in my early days of modding, just a basic woods port @ it turned out to be very torquey for it's size. I'd like to be turned loose on one now:msp_wink: just sayin:msp_biggrin:

Do yer worst... That saw's getting finger ports whether you carve em' or me, it's gonna get em'... We'll discuss particulars on the 12 hr drive...:msp_sneaky:

 

[Stumpys Customs]

Do yer worst... That saw's getting finger ports whether you carve em' or me, it's gonna get em'... We'll discuss particulars on the 12 hr drive...:msp_sneaky:

Sounds like plan to me..

 

[Stumpys Customs]

Hedgerow came over Saturday to have some trigger time on this 576 & the 562. He brought along his Dolmar 9010 & his 372 I built for him last year. We used the same 28" b&c on all the saws in a 21" oak log. Here's how the times went. The 562 broke the starter before we could get a test cut with the 28" bar.

576xpat 17.50
9010 18.10
372xp 19.20
365sp 20.45 (build off saw)


We also run the 576, 562 the 365 with the 15" buildoff B&C in a 10" pine log and got these times

576 2.8
365 3.4
562 4.0

 

[specter29]

Hedgerow came over Saturday to have some trigger time on this 576 & the 562. He brought along his Dolmar 9010 & his 372 I built for him last year. We used the same 28" b&c on all the saws in a 21" oak log. Here's how the times went. The 562 broke the starter before we could get a test cut with the 28" bar.

576xpat 17.50
9010 18.10
372xp 19.20
365sp 20.45 (build off saw)


We also run the 576, 562 the 365 with the 15" buildoff B&C in a 10" pine log and got these times

576 2.8
365 3.4
562 4.0

What a husky beat a dolmar and a 9010 no less :msp_w00t:

 

[Hedgerow]

What a husky beat a dolmar and a 9010 no less :msp_w00t:

Stumpy didn't push hard enough... He was in race saw mode...
Not Tyrannosaurus saw mode...
:hell_boy:

 

[Stumpys Customs]

Stumpy didn't push hard enough... He was in race saw mode...
Not Tyrannosaurus saw mode...
:hell_boy:

I knew that was commin
We can have a rematch with a non partial operator @ the GTG:msp_wink:

 

[Hedgerow]

I knew that was commin
We can have a rematch with a non partial operator @ the GTG:msp_wink:

He better be 6'10" and weigh 300 lbs...
Just sayin...
And stuff...

 

[bryanr2]

Hedgerow came over Saturday to have some trigger time on this 576 & the 562. He brought along his Dolmar 9010 & his 372 I built for him last year. We used the same 28" b&c on all the saws in a 21" oak log. Here's how the times went. The 562 broke the starter before we could get a test cut with the 28" bar.

576xpat 17.50
9010 18.10
372xp 19.20
365sp 20.45 (build off saw)


We also run the 576, 562 the 365 with the 15" buildoff B&C in a 10" pine log and got these times

576 2.8
365 3.4
562 4.0

Interesting that a 576 with fresh woods port whipped up decisively on a broke in 372.

 

[Hedgerow]

Interesting that a 576 with fresh woods port whipped up decisively on a broke in 372.

That was a ported 372.. It's well broke in and it ain't no slouch... That 576 runs gooood...

 

[WKEND LUMBERJAK]

I knew that was commin
We can have a rematch with a non partial operator @ the GTG:msp_wink:

I volunteer to be that guinee pig. :msp_w00t::msp_w00t:

 

[WKEND LUMBERJAK]

He better be 6'10" and weigh 300 lbs...
Just sayin...
And stuff...

How about 6'5" and 280:msp_wink::msp_wink:

 

[WKEND LUMBERJAK]

JUST DAWNED ON ME YOU NOT TALKING ABOUT JASPER......:taped::taped::taped:

 

[specter29]

JUST DAWNED ON ME YOU NOT TALKING ABOUT JASPER......:taped::taped::taped:

maybe you should just catch a ride with boys just sayin

 

[Hedgerow]

maybe you should just catch a ride with boys just sayin

Are you kiddin' me??? It's all we can do to get Kenneth to come down to Jasper every other year!!!
:waaaht:

 

[specter29]

Are you kiddin' me??? It's all we can do to get Kenneth to come down to Jasper every other year!!!
:waaaht:

yea but in Wisconsin we got real cheese and pie with real dairy in it :hungry:

 

[rburg]

If that 576 was faster than the 9010, 372, and 365 it must be a good one. I have run those 3 and they will put a smile on your face.

 

[Hedgerow]

If that 576 was faster than the 9010, 372, and 365 it must be a good one. I have run those 3 and they will put a smile on your face.

That's right! You ran every one of em' in TN...

 

[WKEND LUMBERJAK]

Real Wisconson cheese.:msp_thumbsup::msp_thumbsup: What route are you guys taking. anywhere close to Nebraska?:msp_sneaky: