tallguys
Addicted to ArboristSite
First of all, let me say that I've been more than happy with my set-up as I don't do a lot of heavy cutting, but now I gave in to a bit of CAD and want some opinions. My most used saws have been my under 40cc ones for most work around the yard. My PS510 has been all I ever wanted doing mostly firewood duty. I figured somewhere down the road I'd look for a good deal on a PS6400 or 7300, if and when the need presented itself. Then I chanced upon this barely used MS361 and impulse took over.
So here is the question: Does it make more sense to sell the 510 and keep the 361 for firewood and larger duties which kind of future proofs me since I probably won't need to spring for that 6400/7300 down the road. Or do I keep with the original 3 saw plan and skip the 60cc, instead using it as a trade in against a larger saw which would only get an occasional workout as most of what I cut is done well enough with the 510.
Any and all suggestions welcomed, of course.
So here is the question: Does it make more sense to sell the 510 and keep the 361 for firewood and larger duties which kind of future proofs me since I probably won't need to spring for that 6400/7300 down the road. Or do I keep with the original 3 saw plan and skip the 60cc, instead using it as a trade in against a larger saw which would only get an occasional workout as most of what I cut is done well enough with the 510.
Any and all suggestions welcomed, of course.
Last edited: