Is it a known good carb? If the carb is good, I would check and see if your impulse hose is connected.I recently rebuilt a ms200t new cylinder,piston etc. It won't start its not getting gas I don't no why any ideas?
Zama carb I bought the rebuild kit and did that to. The gas isn't even getting to the impulse line . I check the compression its weak. What do I do to get better compression?Is it a known good carb? If the carb is good, I would check and see if your impulse hose is connected.
Are you sure your gauge is good, do you have another saw that you can check with it? Did your rebuild also include new rings? That's an awful low reading for a new top end. I would think even with some no name, white box, aftermarket kit you should be getting a higher reading than that.Finally got it to start! But the compression is still low about 80/85. What else can I do?.
Enter your email address to join: