Hi gang, I'm hoping someone has done this before.
Just picked up a Haldex Pump 28 GPM, 2-Stage, Model# 1080036
from Northern tool. The suction and discharge are on opposite sides
of the pump housing. In order to simplify and reduce the number of turns,
would it be possible to reclock the pump, rotate the rear housing in order
to have the suction and discharge on the same side? The pump bolt
pattern looks rectangular not square so it seems the only option would
be 180, not 90 degree rotation?
I'm hesitating cracking the pump open as I've never messed with a dual
stage pump so I'm not sure if its just two pumps stacked and bolted together on a common shaft.
-Jason
Just picked up a Haldex Pump 28 GPM, 2-Stage, Model# 1080036
from Northern tool. The suction and discharge are on opposite sides
of the pump housing. In order to simplify and reduce the number of turns,
would it be possible to reclock the pump, rotate the rear housing in order
to have the suction and discharge on the same side? The pump bolt
pattern looks rectangular not square so it seems the only option would
be 180, not 90 degree rotation?
I'm hesitating cracking the pump open as I've never messed with a dual
stage pump so I'm not sure if its just two pumps stacked and bolted together on a common shaft.
-Jason