wadeclinton
ArboristSite Lurker
I was sent a video of a small diameter log processor via Facebook. I'm tempted to call BS on it but thought I'd ask around here. I searched and didn't find it sorry if it's a repeat. From what my father in law and I can tell it looks to be a 5HP or larger electric motor, 4" or so drive pulley, 12" or so driven pulley and the upper shaft looks to be 2" based on the bearing that can be seen. And most likely uses a knife of set of timed knives to actually cut the material. I'm curious if this type of machine is real or not, and if so is it practical for use on olive wood? My father in law has an orchard and has quite a bit of limb wood from pruning that we've devised no real fast practical way to make it useable.
Link to video, hopefully it works doing this from tapatalk.
https://www.facebook.com/clint.wade.16/posts/10205453905252186
Link to video, hopefully it works doing this from tapatalk.
https://www.facebook.com/clint.wade.16/posts/10205453905252186