Scrounging Firewood (and other stuff)

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Looks good, but for $130 I’d like to see if I can get it on sale or in the off season or clearance. My old beat up wheel barrow will have to suffice for now.
View attachment 806794
I got one of those and liked it at first, then I bent the handle. Used it to cover the engine on the wood splitter for a year or two. Then got the bright idea to mount it on my Walk behind to move mulch. For that, it works great. Yes, it still dumps.
S903rMG.jpg
 
Social distancing is good for you they say so ,,,

Seeeing as I have a fulltime helper for 3 weeks.........he asked me, "ya think that deer has carona virus?"
Then i had to explain deer dont like Carona.
Saw a plane flying overhead today though maybe they were looking for survivors, had to hide my beer.
 
Finally split the trailer load I cut to break in the new 241. A good mix of ash, sugar maple, honey locust, and mulberry or black locust??

Then I ran the 241 for a bit to cut up some smalls. The more I use this saw, the less I want to grab anything else. Has anyone run an 18” on a 241? I’m tempted to try one.

080EAC0B-042B-4542-A79C-5330CA1ADA7E.jpeg
FA885CA7-C324-44B0-8B75-C342BC98A7C8.jpeg
 
Finally split the trailer load I cut to break in the new 241. A good mix of ash, sugar maple, honey locust, and mulberry or black locust??

Then I ran the 241 for a bit to cut up some smalls. The more I use this saw, the less I want to grab anything else. Has anyone run an 18” on a 241? I’m tempted to try one.

View attachment 807237
View attachment 807238
Nice load.
You can run an 18 on them, but you loose a bit of the go factor the smaller bars offer.
For a comparison the 251 has a little less ho and is sold with a 325x16 or 18(some I've seen set up with picco) and it does an okay job, you will just loose a little speed in the cut/torque to dawg it in, but that isn't what they are really made for anyway.
 
I managed to split a few rounds today, cleaned the woodshed up for the 2021-22 wood as well. I have just under a cord left that I'm burning right now, whatever is left will stay where it is, this mild winter is helping that part a lot.
The rounds on top of the middle were added mostly on Friday and a few splits we added today, then cleaned the floor off and started on the front row.
Before:
Screen Shot 2020-03-15 at 10.45.34 PM.png
Screen Shot 2020-03-15 at 10.46.10 PM.png
After:
Screen Shot 2020-03-15 at 10.46.47 PM.png
 
Finally split the trailer load I cut to break in the new 241. A good mix of ash, sugar maple, honey locust, and mulberry or black locust??

Then I ran the 241 for a bit to cut up some smalls. The more I use this saw, the less I want to grab anything else. Has anyone run an 18” on a 241? I’m tempted to try one.

View attachment 807237
View attachment 807238

I have (I mean, Cowgirl has) a ported 241 with 16 inch bar and 0.325 chain. I love it (I mean, she loves it) and it is perfect for what I (she) bought it for - lopping small stuff - but then I (she) also found that it was great for burying into dry eucalypt also. Beyond that though, I think it will start to struggle. Unported, I think an 18 inch bar would max it out in hardwood, especially dry. I bought my old man a stock 241 with a 16 inch bar and it is flat out buried in eucalypt. I'd keep the 16 inch bar on there and go for a bigger saw when 18+ inch wood comes along. If you go sticking a bigger bar on it then you start to lose some of the zip that it has in the smaller material that it was intended for.
 
Since it's crept it's way into this thread, for whatever reason, I'm gonna throw my observation out there. I drive truck for a living, and I recently began a run that delivers to Toronto, Ontario. Some of you younger guys may not remember the mass hysteria associated with the SARS outbreak, but it was a contagious virus, quite similar to the current Coronavirus epidemic, and Toronto was pretty much the eye of the storm. The Greater Toronto Area is home to roughly 6 million people, but from what I can tell it's pretty much business as usual, no mass hysteria. What I have noticed is personal at the toll booths, customs booths and behind the cash registers wearing a simple pair of latex gloves. I keep noticing janitorial staff running around with bottles of spray cleaner and paper towels, wiping things down in high traffic areas. Also notice store employees picking up any loose trash and emptying the garbage cans before the ****'s overflowing all over the place. Simple, common sense, proactive steps will go much further than all the stupidity we've seen here. I just left my local Wal-Mart, and the bread isle is damn near empty. PERFECT time to get in there and clean those shelves, but instead you could pretty much hear the crickets chirping.

Gov Inslee (Washington) ordered all restaurants and bars to close. I can see many small businesses going bankrupt if it persists for long.

Schools are all closed as of Monday evening, churches are voluntarily closing or holding very abbreviated services.
 
Finally split the trailer load I cut to break in the new 241. A good mix of ash, sugar maple, honey locust, and mulberry or black locust??

Then I ran the 241 for a bit to cut up some smalls. The more I use this saw, the less I want to grab anything else. Has anyone run an 18” on a 241? I’m tempted to try one.

View attachment 807237
View attachment 807238
You just need a 261 with an 18" .325 bar on it .:surprised3: I don't think the 241 would impress you with the 18.
 
Thanks all. I’ll stick with the 16” on the 241. I love how she cuts, so I don’t want to compromise that.

As much as I love my 361, this Mtronic is growing on me. May have to break down and get a 261...
 
Well, it's been a beautiful winter to get out and cash in on what mother nature provides up here in Northern Mi. Hopefully, the snow will be gone in a couple weeks and I can get the splitter back in here and clean this mess up.View attachment 807121
Better stay in the woods! The hoards have your beautiful town on their radar.
For those that don't know, there is a toilet paper factory in Lionfan's area.
 

Latest posts

Back
Top