Silky handsaws

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Grey

Wood junky
Joined
Oct 6, 2008
Messages
560
Location
PA
Looking for an all-around hand saw. Looks to me like the Zubat 330 is the basic Silky and I've found some at decent prices. Any others I should be looking at? Thanks.
 
zogger

zogger

Tree Freak
Joined
Nov 23, 2010
Messages
16,456
Location
North Georgia
A hand saw for climbing and trimming, or general bucking? A good quality (not walmart/home depot chinese junk) bowsaw will cut some wood, either a 30 or 36 inch. I cut 4-6 cord a year for five winters before with a 30" Sandvik. Sandvik, bahco, fiskars, proly some more out there.

Nice to be able to use both hands on beefy rounds. Then there are crosscuts. There are wilderness trail clearers, that's all they can use because of regs, some good ones out there.
 

Grey

Wood junky
Joined
Oct 6, 2008
Messages
560
Location
PA
1) I have a very nice Sandvik bow saw and it is a vicious beast. I goes through wood like a hot knife through butter. I totally agree that a good quality bow saw is a highly unrated tool.
2) My Zubat 330 came in the mail today. This is an awesome addition, bridging the gaps between a chainsaw, bowsaw and lopper. I tried it today on 4" partially dry beech, and it blew through it with ease.
 
ncpete

ncpete

ordained Dude
Joined
May 20, 2013
Messages
953
Location
Beautiful (?) Sandhills of North Carolina
I grew up using a 30" and 24" bowsaw - and helped clear a LOT of the cross-country ski trails on my parents property. As I was much to young to run the chainsaw, my job was to limb everything that wasn't being taken down with the bow saws, or a pair of loppers. The 24" saw was easier to carry in the winter on my back while on skis, and I could clear low branches with it quite easily, without disturbing the peace of the northern Adirondack forest. Also used it once to clear a smaller tree that had fallen over a trail due to snow weighing it down. A sharp tool can go a long way towards doing the job.
 
KenJax Tree

KenJax Tree

Terraphobic
Joined
Feb 17, 2012
Messages
11,593
Location
Over there
1) I have a very nice Sandvik bow saw and it is a vicious beast. I goes through wood like a hot knife through butter. I totally agree that a good quality bow saw is a highly unrated tool.
2) My Zubat 330 came in the mail today. This is an awesome addition, bridging the gaps between a chainsaw, bowsaw and lopper. I tried it today on 4" partially dry beech, and it blew through it with ease.
They cut skin with ease too....i have scars to prove it be careful with that thing.
 
sweetjetskier

sweetjetskier

ArboristSite Operative
Joined
Jan 27, 2010
Messages
414
Location
CT Shoreline
The Zubat is the hand saw of choice for most arborists, its light, great ergonomics, cuts with ease and stays sharp a long time.

Like any saw, one needs to pay attention while using, the Zubat slices skin as easy as tree bark.

Well worth the money for a quality arborist hand saw.
 

Latest posts

Top