Sold Simonized 390xpgw

[Big_Wood]

Listing this saw for sale to fund another project. It is certainly not a beauty queen but runs very good and oils as it should. Pictures will speak for themselves and any questions don't hesitate to ask. The piston has some visual marks on it but I assure you they are smooth. I removed top end when I realized the marks and they appear to just be from hours as everything was smooth and well lubricated. The porting was done with a pop up piston and squish set at .026 without a gasket. the popup is only .005 IIRC so a new piston could be used and get .021 squish. no idea why it was done that way but he must believe it needs more squish clearance why he did it.The handle heat works as it should as well. This saw spun it's PTO main bearing so I split the case and installed new bearings. The PTO side was a snug fit but I wasn't taking any chances so did a few tack welds on the inner race to the crank. Solid repair and I've got over 100 tanks on this saw running as it sits. Price reflects it's worth and it will cost $70 to ship. $425 shipped and it is all OEM. I know Canada Post was on strike so I will have to check if I can even ship it but figured I'd list it to get people interested.

 

[sawfun]

Great price, My Simonzed 372 sure runs strong and the decomp is a must as it feels locked up without.

 

[Big_Wood]

thanks Don. i'm doing a project on the truck, new batteries and EFI live tuning. if it weren't for that i'd keep it as a spare saw. already have like 5 spares though lol

 

[sawfun]

I understand that. My 088 is getting sold to help fund my basement drainage and sump project as a spring has materialized under my house. I think I may just have enough other big saws that I can get by without that one.

 

[skippysphins]

So Shane your playing with a diesel ?
Efi live tunes . You have to do the intake as in airbox and the exhaust ! And a lift pump .
Skippy

 

[Big_Wood]

So Shane your playing with a diesel ?
Efi live tunes . You have to do the intake as in airbox and the exhaust ! And a lift pump .
Skippy

lol, that was done a few years ago skip. i've had my truck for 5 years now and was tempted to trade it in but i hate the emission stuff on the new ones. i never wanted to tune it but i gotta a buddy with EFI live who speaks so highly of it so gonna give her a go. stock tranny for now so just gonna get the 60hp over tune with the speed limiter removed. i hate being passed by toyota echo's lol

 

[skippysphins]

Ok I have efi live on my 2015 duramax with all emissions deleted . I run the 100 hp tune it runs like the wind . Has more power than I probably need but I love it .

 

[Big_Wood]

Ok I have efi live on my 2015 duramax with all emissions deleted . I run the 100 hp tune it runs like the wind . Has more power than I probably need but I love it .

it's not even legal to delete all emissions on them. here anyways. how in the heck did you delete the urea injection system? i'm not real familiar with the LML and the mods that have come available in recent years. if i went and bought a new truck today it would be an F350 with the 6.7 and i'm a chevy guy lol my biggest excitement is the speed limiter disable for the unpatrolled highways

 

[DSW]

Heck of a price on that saw. Good luck with the sale.

 

[Lisa Cox]

Do you still have this chainsaw for sale. Thanks?


[
QUOTE="westcoaster90, post: 5940106, member: 93217"]Listing this saw for sale to fund another project. It is certainly not a beauty queen but runs very good and oils as it should. Pictures will speak for themselves and any questions don't hesitate to ask. The piston has some visual marks on it but I assure you they are smooth. I removed top end when I realized the marks and they appear to just be from hours as everything was smooth and well lubricated. The porting was done with a pop up piston and squish set at .026 without a gasket. the popup is only .005 IIRC so a new piston could be used and get .021 squish. no idea why it was done that way but he must believe it needs more squish clearance why he did it.The handle heat works as it should as well. This saw spun it's PTO main bearing so I split the case and installed new bearings. The PTO side was a snug fit but I wasn't taking any chances so did a few tack welds on the inner race to the crank. Solid repair and I've got over 100 tanks on this saw running as it sits. Price reflects it's worth and it will cost $70 to ship. $425 shipped and it is all OEM. I know Canada Post was on strike so I will have to check if I can even ship it but figured I'd list it to get people interested.

[/QUO

 

[Big_Wood]

it is still for sale but i have to find out if i can ship it since Canada Post is hurt'n. will hopefully know later. i went to see the PO but long weekend here so they were closed. texted my buddy who's wife works there and waiting for him to respond.

 

[GCJenks204]

Shane, for the latest in the potential work stoppage see the link below. You should be good to go on any shipping for now.

https://www.canadapost.ca/web/en/comm/list.page?ecid=murl|ddn|lr|5

 

[Lisa Cox]

is that the least you would take on the price and how much do you think new piston would cost
thanks

it is still for sale but i have to find out if i can ship it since Canada Post is hurt'n. will hopefully know later. i went to see the PO but long weekend here so they were closed. texted my buddy who's wife works there and waiting for him to respond.

ss

 

[Big_Wood]

lowest price. you heard the boys say great price lol. i wouldn't replace the piston. sure it has some wear but those marks aren't scoring. they are polished shiny in those spots for some odd reason. all bearings are tight. this saw would likely last a firewood cutter 20 years as is lol

 

[Full Chisel]

PM sent

 

[Lisa Cox]

I would like to buy your saw if you still have it. How do you want me to pay you for it?

 

[Woos31]

thanks Don. i'm doing a project on the truck, new batteries and EFI live tuning. if it weren't for that i'd keep it as a spare saw. already have like 5 spares though lol

EFI live will be much more fun!! That is a good lookin worker, no bones about it she'll work. I feel that's a really good deal pard

 

[skippysphins]

Shane
Let me tell you there isn't much on the road that can pass my duramax . Definitely no import Hondas . They hate my truck

 

[Big_Wood]

sorry i haven't been here to update. this is gonna go in the sequence of which people replied. i'm not gonna give them forever to decide though but i'm gonna start at the first PM. Lisa, you were the third person interested. i will let you know later tonight or tomorrow AM if the others pass.