Big_Wood
westcoast dweller
Listing this saw for sale to fund another project. It is certainly not a beauty queen but runs very good and oils as it should. Pictures will speak for themselves and any questions don't hesitate to ask. The piston has some visual marks on it but I assure you they are smooth. I removed top end when I realized the marks and they appear to just be from hours as everything was smooth and well lubricated. The porting was done with a pop up piston and squish set at .026 without a gasket. the popup is only .005 IIRC so a new piston could be used and get .021 squish. no idea why it was done that way but he must believe it needs more squish clearance why he did it.The handle heat works as it should as well. This saw spun it's PTO main bearing so I split the case and installed new bearings. The PTO side was a snug fit but I wasn't taking any chances so did a few tack welds on the inner race to the crank. Solid repair and I've got over 100 tanks on this saw running as it sits. Price reflects it's worth and it will cost $70 to ship. $425 shipped and it is all OEM. I know Canada Post was on strike so I will have to check if I can even ship it but figured I'd list it to get people interested.