Stihl working hard
Is it Friday yet
You're right, I did. I was thinking you were only interested in the 261.
Ported Video coming up!
You're right, I did. I was thinking you were only interested in the 261.
Ported Video coming up!
If both go, then the 261. If only the 241, then that little beastYou're right, I did. I was thinking you were only interested in the 261.
Ported Video coming up!
She's a runner now! I'm seeing a 20%-35% gain, depending on load. The biggest improvement is under maximum load, where I saw a 35% gain. Can you say torque? At medium load, where fastest cut times are found, I saw a 25% gain. At light load I saw a 20% gain.
BTW, the cut times from the MM only video do not well represent the improvement that made in the saw. The knots really threw it off. The improvement was significant.
I'm going to go get something to eat, then I'll best testing the 346XP and MS241C in this same wood, and hopefully get 63PS Picco chain on the 346 and 261.
A magnanimous gestureThat saw is moving!! If you want to compare that nw 261 an oe 261 you could could port the on I have. You know for research and what have you.
Should be very similar. The porting is the same.How would this compare to the earlier model 261 M Tronic that you did for me?
That could be arrangedThat saw is moving!! If you want to compare that nw 261 an oe 261 you could could port the on I have. You know for research and what have you.
So lighter & with a neato clutch cover?Should be very similar. The porting is the same.
Correct.So lighter & with a neato clutch cover?
It's alright..........I'll just cry myself to sleep.........If both go, then the 261. If only the 241, then that little beast
Enter your email address to join: