jdowney
ArboristSite Member
This is a parts Stihl 011AV saw that runs. I do not know the history of saw. All parts in the pictures are included. I got the saw to fire up for a few seconds but didnt run it long for two reasons: very tough to keep it running with broke throttle channel and exhaust not seated due to stripped bolt hole.
Bad:
Three stripped bolt holes; 1 muffler, 2 in case for recoil housing(labeled by yellow circles)
Broken throttle channel/bracket(where throttle cable exits the case towards the handle)
One of the clutch covers/housing is cracked
Missing parts: air filter, pull starter handle/rope, spark plug wire & boot, possibly bolts/screws, could be other parts cant think of.
Good:
140 PSI, piston looks good.
Mostly complete saw
Note: for the picture of it all together i just placed it that way for the picture, it was not actually bolted together.
Looking to get $45 + shipping OBO
Thanks
Bad:
Three stripped bolt holes; 1 muffler, 2 in case for recoil housing(labeled by yellow circles)
Broken throttle channel/bracket(where throttle cable exits the case towards the handle)
One of the clutch covers/housing is cracked
Missing parts: air filter, pull starter handle/rope, spark plug wire & boot, possibly bolts/screws, could be other parts cant think of.
Good:
140 PSI, piston looks good.
Mostly complete saw
Note: for the picture of it all together i just placed it that way for the picture, it was not actually bolted together.
Looking to get $45 + shipping OBO
Thanks