Working on a 1979 version Stihl 028AV Super. Need some replacement parts. Is Stihl still making these parts? Based on waiting for 3 months so far to get some parts for a 361 I expect these will also become a back order parts.
* - Fuel Hose
* - Fuel Vent Hose ( looks like a short piece of Tigon hose with 2 grub screws inside)
* - Impulse Hose
* - Crank seals - Clutch side leaking, Flywheel side not. But should do both.
Saw has 150 psi compression at 5,000 ft elevation and piston looks great! The case held vacuum no problem and even while spinning crank.
Pressure test it would only reach 5psi and drop to 4 psi and hold it. Took the clutch pack off and noticed the seal would not leak until after 4psi and limit pressure build at 5 psi.
If I can't get seals through dealer is there a source through Granger or?? that can get OEM quality?
Thanks, Patrick
* - Fuel Hose
* - Fuel Vent Hose ( looks like a short piece of Tigon hose with 2 grub screws inside)
* - Impulse Hose
* - Crank seals - Clutch side leaking, Flywheel side not. But should do both.
Saw has 150 psi compression at 5,000 ft elevation and piston looks great! The case held vacuum no problem and even while spinning crank.
Pressure test it would only reach 5psi and drop to 4 psi and hold it. Took the clutch pack off and noticed the seal would not leak until after 4psi and limit pressure build at 5 psi.
If I can't get seals through dealer is there a source through Granger or?? that can get OEM quality?
Thanks, Patrick