I bought a 036 pro that wasn't running and I have been having problems getting to run right. It had low compression so I replaced the piston that was scored and the bad rings it had. I was able to clean up the cylinder. I replaced crank seals when I did all that since they were leaking when I checked them. I also rebuilt the carb. It will still not run correctly. I have spark. It will run for a couple minutes and than die and won't restart. I am pretty sure its a fuel problem but not sure what else to do. When it does run it won't rev up properly and just bogs and I've tried a lot of different settings with the low/hi screws. The fuel filter is new and the fuel line has no holes or cracks. The boot from carb to cylinder is in good shape no defects. What else can I check so I can get this running properly?
Thanks
Thanks