Bit of a conundrum here. I need a cup screw assembly for a Stihl 03 clutch handle. IPL Part number 0000 790 6102.
The local parts store ordered me one, but when it came in, the cup would not fit inside the hole of the handle. Cup diameter too large. Next time I took the handle in and showed him. The handle has part number 1117 792 9100 on it. I was told that wasn't the right handle for the saw. He'd order the right part number. Well he ordered the handle not the cup screw. Suppose to try again tomorrow. BTW, my 038 IPL says my handle number IS 1117 792 9100.
I need an assembly with a M5 bolt probably 18 mm long. An ebay vendor stated the part for an Stihl 044? part number 0000 790 6100 or 0000 790 6103 had a cup diameter of 12 mm. I lost track. I measured mine and it's only 10 mm. I'm guessing the first one ordered by the parts place was 12 mm and the warehouse screwed up.
I need 10 mm od cup (not flange) with a M5 bolt.
Any thoughts
Thanks
The local parts store ordered me one, but when it came in, the cup would not fit inside the hole of the handle. Cup diameter too large. Next time I took the handle in and showed him. The handle has part number 1117 792 9100 on it. I was told that wasn't the right handle for the saw. He'd order the right part number. Well he ordered the handle not the cup screw. Suppose to try again tomorrow. BTW, my 038 IPL says my handle number IS 1117 792 9100.
I need an assembly with a M5 bolt probably 18 mm long. An ebay vendor stated the part for an Stihl 044? part number 0000 790 6100 or 0000 790 6103 had a cup diameter of 12 mm. I lost track. I measured mine and it's only 10 mm. I'm guessing the first one ordered by the parts place was 12 mm and the warehouse screwed up.
I need 10 mm od cup (not flange) with a M5 bolt.
Any thoughts
Thanks