• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Stihl 064

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

TBrown

more saws than I need
Joined
Oct 26, 2008
Messages
693
Reaction score
659
Location
eau claire, wi
I have a 064av with aftermarket piston and cylinder. It starts, runs, idles, and oils good. Saw had an air leak and was fixed, has ran good since new top end was installed a few years ago.The air filter cover has the corner broken off and the rear handle has the bottom foot plate broken off, doesn't affect function. I also have a complete crankcase and two OEM cylinders with aluminum transfer. Bunch of other parts too, carb, recoil, top cover, and side cover.
 

Attachments

  • IMG_20140219_130003_966.jpg
    IMG_20140219_130003_966.jpg
    55.5 KB · Views: 175
  • IMG_20140219_130057_410.jpg
    IMG_20140219_130057_410.jpg
    53.1 KB · Views: 175
  • IMG_20140219_130416_944.jpg
    IMG_20140219_130416_944.jpg
    42.2 KB · Views: 163
  • IMG_20140219_130037_172.jpg
    IMG_20140219_130037_172.jpg
    53.9 KB · Views: 144
I'm kind of looking for an offer on the whole works. I do have another 064 and am toying with either selling it or sending it off for porting and selling my 460. Also have a 372xp to sell.
 
I was thinking 350 for the 372.
We will see about the 460 after the smoke clears. The 460 is all OEM with new bearings. Was my favorite till the day I ran my tree monkey 361
 
.
 

Attachments

  • IMG_20140219_164507_123.jpg
    IMG_20140219_164507_123.jpg
    82.2 KB · Views: 89
  • IMG_20140219_164245_307.jpg
    IMG_20140219_164245_307.jpg
    73.1 KB · Views: 90
I checked the spare crankcase over. The bearing is tight in the case and the crank looks good. The piston in the saw looks good too.
 

Attachments

  • IMG_20140220_131607_806.jpg
    IMG_20140220_131607_806.jpg
    71.4 KB · Views: 31
350 for saw. It starts and runs good
75 for crankcase
50 each for OEM cylinders
475 for everything
Feel free to counter offer
 

Latest posts

Back
Top