• If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sold Stihl 064

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Woodslasher

Make McCulloch Great Again!
. AS Supporting Member.
Joined
Jan 2, 2019
Messages
4,000
Reaction score
6,374
Location
Commiefornia
Up for sale is a Stihl 064 with a 3/4 wrap. I got this as a running saw with a bad top end. So far I've installed a new Cross MMWS top end that I beveled the exhaust on, oem circlips, a new Hyway muffler, a new oem recoil pulley, and rebuilt the carb.
The pros with the saw are the "ported" top end, the 3/4 wrap/wide cover, it has the HD2 filter setup, and the carb is a Walbro with readily available parts.
The only cons with it are a chunk's missing out of the clutch cover, the filter cover's got a few cracks in it, the top cover has a piece busted off, the slot for a screwdriver in the filter knob is busted, and it's missing the plastic chain slides and rubber catcher. The one other thing I will mention, the tank looks pretty checkered by the fuel cap but it's still sound and the marks are purely cosmetic.
I'm selling it pho (the light bar is not for sale), I'd like to get $625 + the ride for the saw, but I'm open to offers.
IMG_5394.jpegIMG_5398.jpegIMG_5395.jpegIMG_5396.jpegIMG_5397.jpegIMG_5399.jpegIMG_5404.jpegIMG_5401.jpegIMG_5400.jpegIMG_5402.jpeg
 
I like your saw, I’m sending you my phone number so you can call me at your convenience. Thanks.
 
Came in the mail multiple days before I was expecting it to. Finally had a chance to cut with it yesterday. Burned through a couple tanks of fuel with an 8 pin and a 20" bar chunking HARD firewood. Runs great, thanks!
 
Back
Top