Davidnewham
ArboristSite Member
Hi guys I've just bought a 029 super for £60 Is this good value and is there any bad points it is running
Stihl a good idea?
- Thread starter Davidnewham
- Start date
Help Support Arborist Forum:
That's about $105 CND. If it's comparable size to the new MS291 then that saw retails for $670 CND.
Sounds like a good deal if it runs and not too much to make it road worthy.
I bought a Stihl 044 in very good shape for $350 CND (list price for new Stihl MS441 is $1450.00 CND)
Lets see some pics of it.
Sounds like a good deal if it runs and not too much to make it road worthy.
I bought a Stihl 044 in very good shape for $350 CND (list price for new Stihl MS441 is $1450.00 CND)
Lets see some pics of it.
Davidnewham
ArboristSite Member
Pick it up Sunday will put pics on later that day. I think the 029s & ms291 are very similar
My MS291 with 18" bar bought new from my local dealer for $550.
Came with the case and a six pack of Stihl 2 cycle oil and a 3 year warranty.
Came with the case and a six pack of Stihl 2 cycle oil and a 3 year warranty.
My 044.
Came with a brand new 18" bar and chain which I took off and replaced with a 28" bar and two chains.
I also got a case for it. $30 from my dealer.
First pic is with the 18" bar.
Second is new 28" bar and chains.
Third is both saws in their cases. Can you tell which has the 28" bar?....lol.
Came with a brand new 18" bar and chain which I took off and replaced with a 28" bar and two chains.
I also got a case for it. $30 from my dealer.
First pic is with the 18" bar.
Second is new 28" bar and chains.
Third is both saws in their cases. Can you tell which has the 28" bar?....lol.
Davidnewham
ArboristSite Member
Haha yeah
The 029s and ms290 are similar. Doing any work on it sucks. I have a 290/390 and a rebuild will take hours. I did the crapsman rebuild in less than an hour it's not me ask around lol they are built stupid but a good saw in my opinion.
Davidnewham
ArboristSite Member
Are they better with 039 jug n slug?
Frogfarmer
ArboristSite Operative
With a 390/039 jug they actually perform well for their weight. Power to weight ratio is the only real downside to an 029. They are a bit intricate to teardown but the average user won't have any desire to open one up.
Davidnewham
ArboristSite Member
Iv worked on a few engines in me time so not a worry. Are the cheap £40 jug n slug kits Ok? Also I hear they can be a pig to start . Any tips please
Frogfarmer
ArboristSite Operative
I have installed a Farmertec 390 jug and it was good quality out of the box. Much better than some of the Chinesium crap. If they are right they are easy to start. A muff mod is mandatory. I have no experience with longevity of the Farmertec kit but it was less than $30. An OEM 390 jug and piston would be the way to go if you need a guarantee of uniform quality.
Davidnewham
ArboristSite Member
Mmm have to be carefully there then
Davidnewham
ArboristSite Member
Why are they intricate to strip? I don't mind a challenge.
Frogfarmer
ArboristSite Operative
Nothing difficult just not the six bolts and a clamp we have gotten to use to on the pro saws. If you are able to disassemble and reassemble simple machines you won't have any trouble.
Davidnewham
ArboristSite Member
Like a good rebuild but its running well may buy kit then its there ready. Best i can find is this
Frogfarmer
ArboristSite Operative
Huztl is Farmertec. Google the names to find the site and look at their parts. Parts come direct from China and take a couple weeks to arrive. They are a reputable company
I rebuilt my craftsman poulan very quickly didn't even have to take the fly wheel off. The 290 was stupid I don't know y it's so complicated to take apart. Everything must come off. I've got the 390 kit with a muffler mod and you can cut anything with the 20 inch bar. My next step is a 24 inch bar. I was not impressed with the hyway kit I had some issues. I sent them an email got nothing back I don't think I'd buy another.
Davidnewham
ArboristSite Member
The one I've shown you is farmertec
Motorsägen 029 at 6 oclock rrroger that red leader, tally ho follow me down now..
nice price if its a running donk & a good enuff saw if keep ya bar size under 20 inch run 3/8 chain keep the filter clean and always finger in the throttle when pushing down the master switch to choke or you'll bugger the switch cam mechanism & can pop out of its cradle
regards from the colony to queen Lizz when next you see her
