HandLogger
ArboristSite Operative
We own and manage forest land and have always used Stihl saws and accessories to do so.
A neighboring land owner has been asking to buy our MS361 for years and, after a lot of slow research, I'm interested in replacing the saw I just mentioned with a Dolmar 7910.
I read an old thread in which adapters for Stihl bars were recommended, but, in the same thread, the SawTroll wrote that the oiling holes will not match up.
We have Stihl bars and [a lot of] chains that are bought and paid for; hence, our interest in using what we have on the big Dolmar...and, by the way, the bar on the MS361 and the Dolmar are both the 20" variety...
Thanks in advance for any productive thoughts...
A neighboring land owner has been asking to buy our MS361 for years and, after a lot of slow research, I'm interested in replacing the saw I just mentioned with a Dolmar 7910.
I read an old thread in which adapters for Stihl bars were recommended, but, in the same thread, the SawTroll wrote that the oiling holes will not match up.
We have Stihl bars and [a lot of] chains that are bought and paid for; hence, our interest in using what we have on the big Dolmar...and, by the way, the bar on the MS361 and the Dolmar are both the 20" variety...
Thanks in advance for any productive thoughts...