I've got an old Stihl 041AV. The saw ran perfect for many years, until recently. Then it quit running one day and wouldn't fire back up. I ended up replacing coil, points and condenser (and had to take somewhere for professional assistance to set timing afterwards). I used the saw once, and towards the end it wasn't running up to par. I replaced the plug again and also the spark plug wire. The saw does not have a ton of spark, and no where near blue (light orange) i don't want to chase issues, if this is normal for these. The saw does seem to flood easily, which could be fuel, and not the weak spark (carb is apart too now). Checking the spark plug terminal to any ground is around 5 ohms. Not sure if that means anything or not. Any advice us much appreciated!