Stop reading, join in

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
The number in my IPL on the FS250 is 4119-034-3003., 40mm x 1.5 piston rings, takes two of em....

The FS400 would 1123-034-3005, 40mm x 1.2mm

Cheers!
I know it takes 2 ive had the feckin thing apart twice to try and fit the wrong rings!

I took a Makita RBC420E Strimmer apart yest it was coked up so bad there was only 1/8" hole through the exhaust port, Piston scored a bit.
Cylinder cleaned up well.
The piston was a bit tight to come out, Now it wont go back in! I measure it as being 0.004" bigger than the bore of the cylinder!
How can that be?

New piston ordered.
Its 40cc 1.9hp but man its lame compared to the FS250.
they seem to rev out at 8,600 and the clutch has linings that break twice a year Grr
And to make things worse some of them have non adjustable carbs!
 
The number in my IPL on the FS250 is 4119-034-3003., 40mm x 1.5 piston rings, takes two of em....

The FS400 would 1123-034-3005, 40mm x 1.2mm

Your part number is for the FS350. Those rings are also used in the MS200T...

Cheers for the edit
so the 2003 mediacat type disc i have is a bit wrong!
 
David E. Cavalieri, 40, has been charged with first-degree murder in the death of a woman found yesterday in his Ashburn apartment.

Cavalieri is being held at the Loudoun County Adult Center without bond.

The name of the victim has not been released pending notification of family members.

The arrest stems from a 911 call received Wednesday morning. Deputies responded to a condominium on Timber Ridge Terrace around 10 a.m. for a report of a man who sustained apparent self-inflicted wounds. Cavalieri was taken to a local hospital

The deceased victim was found during cursory search of the apartment conducted as part of the investigation into the apparent attempted suicide.

The incident appears contained to the apartment and domestic in nature.


Just came across that last night. The interesting part is I've done alot of work in Timber Ridge Terrace. I do part time work at that complex on my day off. I've done some work in that mans apartment. His bulilding is 21014, unit 102. That makes 3 murders in my area in the past three weeks, all within 10 miles of my house. Seems people are losing it bigtime during these hard times.
 
David E. Cavalieri, 40, has been charged with first-degree murder in the death of a woman found yesterday in his Ashburn apartment.

Cavalieri is being held at the Loudoun County Adult Center without bond.

The name of the victim has not been released pending notification of family members.

The arrest stems from a 911 call received Wednesday morning. Deputies responded to a condominium on Timber Ridge Terrace around 10 a.m. for a report of a man who sustained apparent self-inflicted wounds. Cavalieri was taken to a local hospital

The deceased victim was found during cursory search of the apartment conducted as part of the investigation into the apparent attempted suicide.

The incident appears contained to the apartment and domestic in nature.


Just came across that last night. The interesting part is I've done alot of work in Timber Ridge Terrace. I do part time work at that complex on my day off. I've done some work in that mans apartment. His bulilding is 21014, unit 102. That makes 3 murders in my area in the past three weeks, all within 10 miles of my house. Seems people are losing it bigtime during these hard times.

We just had a murder in our town...A 40 year old was shot 4 time in the chest outside of a local tavern...The strangest part is the 30 year old guy that shot him walked back up town 20 minutes after he shot him w/ his girl friend to go to the bar...The cops arrested him at the scene when several people who witnessed the shooting identified him as the shooter...:dizzy:
 
:ices_rofl::ices_rofl::ices_rofl::ices_rofl::ices_rofl::ices_rofl::ices_rofl:

Man look at Woodie paddling that boat, sweat pouring off him, 2000K in hot pursuit with bluegrass playing on the ra ditty o.

2000 don't come back without his fingers,LOLOLOLOL

I'm back from woodies cardboard box home, I let him keep the right hand so his sex life could carry on. He mumbled something about being a d-bag all of his life as I left...


:hmm3grin2orange:
 
I'm back from woodies cardboard box home, I let him keep the right hand so his sex life could carry on. He mumbled something about being a d-bag all of his life as I left...


:hmm3grin2orange:
OH MY <a href="http://www.sweetim.com/s.asp?im=gen&lpver=3&ref=11" target="_blank"><img src="http://cdn.content.sweetim.com/sim/cpie/emoticons/00020148.gif" border=0 ></a>
 
LOL
If they just let me round the corner to see the screen I can work it better than the guy there!

Could be, I'm using the latest version they sent and those were the numbers on it......

Well seems the UK version of mediacat dont have ANY part no for FS250 rings!
I was round the corner and the guy tried and gave me the part no for the 120 and the 200 then i pointed out the correct IPL and low and behold theres NO part no for the rings:jawdrop:
I gave the guy the part no you gave me and the details so he is going to ring Stihl on Monday.
 
Back
Top