buildmyown
ArboristSite Operative
The clutch on my SS has seen better days so i was looking around the net for a replacement before calling Paul. Well I came across this Welcome To Jerry's Small Engine Supply Online Catalog. Start Your Savings $$$ Today... if you scroll down you will see some have 2 pulleys. Then the wheels got turning i have seen people use GM power steering pumps to drive acc. on garden tractors just happen to have a pump setup kicking around in the garage. For the valve i was thinking something like this Prince Log Splitter Detent Valve | Hydraulic Valves | Northern Tool + Equipment. The only part that im unsure of is the cylinder I do have a few extra angle plow cylinders kicking around they are only power one way so i was thinking of using it in a gravity down with a return spring setup to keep everything kinda simple. For the lift and frame work it would all hang under the beam and be held with hitch type pins so it could easily be switched around for left or right hand operation, or removed all together if not needed.
So what do you guys think waste of time or im i onto something here that maybe i should persue and do a sketch of.
So what do you guys think waste of time or im i onto something here that maybe i should persue and do a sketch of.