Hey Dan. I finally got the copy of the plans for a gas forge.
Address still the same?
Address still the same?
Sure is quiet in here....do I need to start a fight?
- Thread starter caleath
- Start date
Help Support Arborist Forum:
Yes 
Jimmy in NC
Addicted to ArboristSite
Mean Dan
123 Wood Hauling Minivan Lane
Eskimo Village, frozen Canada
that's it Rob!
Maybe a little snow today....maybe a little rain.....still letting the smoke out my Jonsereds cut firewood....just as soon stop doing that anytime...maybe next month...maybe.....
Was - 10C this morning, all that liquid water was very hard but no new snow so that`s a good thing. Stihl cut wood may be required for the next couple of months, got 28" of ice on the saltwater and more than 36" on the freshwater lakes.
Jimmy in NC
Addicted to ArboristSite
Whew all the way down page one again...
Most of the way through Monday.
Most of the way through Monday.
Not much action on here today, page slips downward quickly.
jimdad07
Addicted to ArboristSite
Can't let her fall
Ain't Satday fer me...busy guy here......been wicked busy on that 'Nadian/English saw......some things not pretty.....but is what it is.....gonna be awesome...after I spend my way to the end......stihl a decent buy.....gonna be brandy new in the end....last me out fer sher......of course this is all so I can do more work......hmmm...hadn't seen that written down before......LOL!!
jimdad07
Addicted to ArboristSite
Got the second 084 case cleaned and pretty as she can be without fresh paint. Started breaking down one of the Johnny Red 90e's I have and getting it cleaned. Looks like it was just starting to go up when she quit for whoever owned it. New rings should take care of it. Clutch is a frigger on this to get off this saw, going to have to build a puller for it. I'm trying to get all of these projects cleaned up and the parts sorted, bagged, labeled and hung on the walls before I get too heavy into building them. My shop floor is permanently waterproofed from all the saw mess I've been cleaning. Good work bench cover is frp board turned smooth side up. Also, I won a brand new 575xp piston tonight delivered for under $9.00. Found a Huztl piston auction that started at .99c and nobody had bid on it. I got for .99c plus shipping. I've had pretty good luck with the Huztl stuff so far.
Welder56
Addicted to ArboristSite
Been a nice few days after the sh!t storms haha. Driveway actually looks decent... first time in months. Can't wait to get back at my ms440.
and get a head start prepping for next winter.
Page 2 ...... Slack
Welder56
Addicted to ArboristSite
Thank god the sun finally has some strength too it. I noticed the snow is compacting down. The ice is alot easier to chip as well
Melting snow and running water, must be spring, sun is warm when its out.
Got a couple of rebuilt /ported saws to get started and tuned, maybe cut some wood with them.
Well, I have a couple of cedar trees to cut. Maybe dig out the tractor and find some road side trees on Sat or Sun .
jimdad07
Addicted to ArboristSite
Picked up a new chain grinder. Switch is a little goofy, once in awhile it cuts out. Wonder if I'm a little too heavy handed with it, maybe I'm over amping the breaker in the switch. Other than that it works well.
cobey
Addicted to ArboristSite
I got one of them, i guess i should put the gaurd on minePicked up a new chain grinder. Switch is a little goofy, once in awhile it cuts out. Wonder if I'm a little too heavy handed with it, maybe I'm over amping the breaker in the switch. Other than that it works well.
jimdad07
Addicted to ArboristSite
How do you like it? BTW, I'm not burning the cutters at all with it. Figured that's how it sounded when I mentioned too much pressure.
