wigglesworth
Booned
wiggs here what i have.
dont have 66 trigger or cover.
plus clutch cover and if you want dual spikes and roller catcher, have that also.
You are the man!!
The official W.Ky Buildoff Poll
- Thread starter wigglesworth
- Start date
Help Support Arborist Forum:
You are the man!!
Work Saw Collector
GTG Coffee Maker
Trash away my friend.
Well, my list got a bit shorter today. A big thanks to young for the parts he sent. Rep him guys, he deserves it!!!!
I still gotta find the trigger parts and handle cover, air filter cover, carb flange nuts, and clutch cover and it's on like donkey kong!!!
I'll go look in the shop this morning I think I have a trigger (loud button) cover. I'll get back with you.
Work Saw Collector
GTG Coffee Maker
Wiggs what all do you need from the ass end of this tank? Cover and all guts? I need the tank but can do without the handle stuff.
PM mailing address.
View attachment 202816
Last edited:
So Jeremy, how does it feel to put this much time and effort into a saw knowing that it's going to get beat?
Work Saw Collector
GTG Coffee Maker
Posting these for a friend I hope to have another flat top for this GTG. I'll get a video taken this weekend and post it here.
Here is the 660 with a 36"
gtg 026 by supercabs78, on Flickr
066 flat top with a 32"
066 by supercabs78, on Flickr
066 by supercabs78, on Flickr
Here is the 660 with a 36"
gtg 026 by supercabs78, on Flickr
066 flat top with a 32"
066 by supercabs78, on Flickr
066 by supercabs78, on Flickr
Work Saw Collector
GTG Coffee Maker
I found an old video of the 066.
<embed type="application/x-shockwave-flash" src="http://www.flickr.com/apps/video/stewart.swf?v=71377" bgcolor="#000000" allowfullscreen="true" flashvars="intl_lang=en-us&photo_secret=4de518b004&photo_id=5712881611" height="300" width="400"></embed>
The saw was turning 11200 I'll put the tack on it this weekend and see what it can do. I'm not saying it will be the fastest saw there but dam it looks good.
I have left it rich first few tanks.
So wiggs whatcha think?
Edit: I have my own tach now I'm not good at the ear thing they are always rich scared of cooking one.
<embed type="application/x-shockwave-flash" src="http://www.flickr.com/apps/video/stewart.swf?v=71377" bgcolor="#000000" allowfullscreen="true" flashvars="intl_lang=en-us&photo_secret=4de518b004&photo_id=5712881611" height="300" width="400"></embed>
The saw was turning 11200 I'll put the tack on it this weekend and see what it can do. I'm not saying it will be the fastest saw there but dam it looks good.
I have left it rich first few tanks.So wiggs whatcha think?
Edit: I have my own tach now I'm not good at the ear thing they are always rich scared of cooking one.
Last edited:
Mastermind
Work Saw Specialist
It does look strong......almost as stout as my stock 066. :hmm3grin2orange:
Work Saw Collector
GTG Coffee Maker
I just got off the phone with a member telling me about that saw but, I think I can take it. :msp_rolleyes: :hmm3grin2orange:
Work Saw Collector
GTG Coffee Maker
Did I mention I am proud of this flat top. I can't let off the loud button and through the race even for a friend. :msp_biggrin:
Mastermind
Work Saw Specialist
I don't really understand what makes this saw of mine run so strong. It has a later model top end on it. It shouldn't do as well.....right?
So, are you admitting it's not as stock as implied?
Mastermind
Work Saw Specialist
So, are you admitting it's not as stock as implied?
No port work, it's wearing a base gasket, not even a MM. It is a frankensaw though. :msp_unsure:
Seems like I read where the builder of that 066 redlight took a stock 346 and beat a ported 346, but that is just what you read on this forum. He must be some kind of saw builder.
wigglesworth
Booned
Might just be cause I'm in my iPhone, but I'm not seeing the vid. I'll check it out once I get to the laptop.
I don't really understand what makes this saw of mine run so strong. It has a later model top end on it. It shouldn't do as well.....right?
I really, really want u to put a wheel on that saw. I thinking that's an early decomp cylinder. Would explain why it runs so well. Mitch still raves about that saw btw
I'll vouch for that. She is as stock as stock can be. Rev limited as well :dunno:
wigglesworth
Booned
Woot woot!!!
<iframe width="560" height="315" src="http://www.youtube.com/embed/Nk4Q_b61d_o" frameborder="0" allowfullscreen></iframe>
<iframe width="560" height="315" src="http://www.youtube.com/embed/Nk4Q_b61d_o" frameborder="0" allowfullscreen></iframe>
Are you going to port it now?
wigglesworth
Booned
Not with this jug. This jug is pretty bad off plating wise. There is supposed to be a nice one headed my way.
Mastermind
Work Saw Specialist
