The we need to help Stump rebuild a shop, replace tools, replace saws thread.

[Hedgerow]

I think the raffle so far is a 925, 076, 32" Husky mount bar, the 090 is going to Ebay it will do well there.

I think it's an 075 Stephen... :msp_confused:

 

[ChainsawmanXX]

Does it have a manual oiler? The 075 also has space between the gas cap and the filter then the 051

Sent from my LS670 using Tapatalk

 

[Hedgerow]

Does it have a manual oiler? The 075 also has space between the gas cap and the filter then the 051

Sent from my LS670 using Tapatalk

It should have the manual assist... And adjustable auto lever I believe. We'll see the differences when it get's here... I may have to find a Large mount Stihl bar for it... Cause I ain't sending anything out of here without a "Test Run"...:msp_tongue:

 

[Hank Chinaski]

It's looking like a Contra will be on the block in a few days for the cause. I was contacted this morning by a member about checking it out and ebaying it.

I'll let him finish telling the tale if he is so inclined. :msp_thumbup:

couldn't he find anyone "good" to do it? :msp_tongue: j/k man, it'll be in excellent hands!

Good plan, Stump. Just shut up. Take it and like it.:smile2:

if he only had a nickle for every time he's heard that, he'd be a rich man...


I consider Stumpy a friend more than just a forum acquaintance and continue to run and enjoy saws that he's built. I wanted to take a short minute and personally thank everyone here for doing what they are each doing. It is a wonderful thing that's happening here.

 

[spanky1205]

This may have already been mentioned. I stopped reading and post 180ish. Someone should start one thread with links to all saws being sold for Stumpy. That way there would be no question which would sell more. AS raffle vs Ebay. Everyone at AS would know exactly what is being sold without having to search though ebays 1000's of listings. Plus anything that was going to be raffled would be seen by everyone on AS plus everyone on Ebay.

What are your thoughts?

 

[tbone75]

I haven't been a member very long here.But I feel like its one big extended family! :msp_thumbsup:

 

[Jon1212]

It should have the manual assist... And adjustable auto lever I believe. We'll see the differences when it get's here... I may have to find a Large mount Stihl bar for it... Cause I ain't sending anything out of here without a "Test Run"...:msp_tongue:

I'm getting ready to ship it out, and I don't have a bar for it. However I may have some spare 36" loops of chain, so I'll check pitch and such, and if it matches up I'll toss a loop in the box too.

 

[R DeLawter]

Yes he is needing cash I was saving that post, waiting on Darin. Stump won't ask but I will.

I am asking members for cash. We like the donations of saws as well, but just need to get a little cash flowing.

MY Paypal addy. that is not a clickabe link to paypal. Have your paypal window open then copy and paste that addy in.

[email protected]

Edit: Now I have his as well.

[email protected]

rest asured If you put money in my accout I will transfer it to him Daily.

A little help sent your way.

The out pouring of help and love is the way things are meant to be.
I have spent time on here trying to learn all I can and Stump has a nice following.
Stump, I wish you a full recovery and I know times will get better for you and yours.

Fabulous people on this site and I got to meet some at the Ohio GTG this fall.
The Lord held my hand through a kidney transplant and people sent me money that I didn't even know. One example was I received a $20 bill in the mail every week for 9+ months with no address or any way to find out the source.
I know the feeling you are going through now. God bless you.

 

[Jon1212]

Yes... But it won't be for parts... It'll be cause I just like hollering at you...
:hmm3grin2orange:

I would imagine this would keep ol' WSC from getting homesick............LOL!!!!!!

 

[an?qus]

Fundraiser thread

Yes he is needing cash I was saving that post, waiting on Darin. Stump won't ask but I will.

I am asking members for cash. We like the donations of saws as well, but just need to get a little cash flowing.

MY Paypal addy. that is not a clickabe link to paypal. Have your paypal window open then copy and paste that addy in.

[email protected]

Edit: Now I have his as well.

[email protected]

rest asured If you put money in my accout I will transfer it to him Daily.

Mastermind, Work Saw Collector and all who are organizing fundraising for Stumpy: You guys are busting your humps for sure, and not wanting especially to add to the load, but whaddaya think about starting a separate thread that lists the ways of contributing to the cause? As far as I can tell for now, you can PayPal Stump indirectly through Work Saw Collector, there's a McCullough 250 auction on eBay from Mastermind, a raffle of a saw being rebuilt and some other saws folks plan to auction. Anything else? Does Stumpy have his own PayPal account you can contribute to at his email address above? It's a little hard to follow with the size of this thread and the rate it's growing. God bless you guys for this labor of love!

 

[8433jeff]

on the way. Edit: done.

Just sent Stump some $$ to his Paypal....Hope it helps......You guys are all doing a lot here....Everyone that's helping Stumpy deserves a pat on the back! Not much of this stuff in this "dog eat dog world" these days!

View attachment 210515View attachment 210516View attachment 210517View attachment 210518View attachment 210519while i havn't been a member here very long loosing stuff like that sucks. i don't know how the ebay thing works but i would like to get as much out of this saw as poss and have the proseedes go to stumpy's cause. i'll put my 090g up it's all there just need's gone threw to make it right. been saving it . but it will do more good this way. any practical way of doing this will be apreciated.

Good... Cause you can't mail an air compressor...
Just sayin...
:hmm3grin2orange:

Who ever said the internet has no personal touch?

i just now seen what happened,,,man this just plain sucks,,, he is a good man,,i don't know what i can do but i will help if i can

Stumpy
Man I'm sorry to see the loss of the shop. I know you had some customer saws in there. When you can, post what you had. I think we can help you with that if you need us to. My shop doesn't supply the family full time, but it's nice to have the extra $$ from it.

This site is amazing.:msp_thumbup: GOD is Awsome. I am in awe at the generosity of the members of this site. Looking things over to see how My family can help. We you Stumpy as a brother.

I've got a nearly complete Jonsered 630, & enough Jonsered 670 parts to put together one saw, maybe two. They'd bring the most money complete and running.

Maybe once a clear plan takes shape, I can send them to an AS member in the position to put together some runners. I'd do it, but in all honestly I'm more of a tinkerer than a mechtech, it would be best if they were built by someone with a solid parts source, and able to get it right the first time.



Stumpy, do you know how the insurance company (IC) is going to handle paying you? In my limited experience, ICs sometimes want you to hire companies to do the work, they won't give you the money & let you do the work. It's wasteful considering that you & your friends could stretch the $$ further, but it's the IC's way of making sure the $$ doesn't get pocketed.

Wish I had some cash to give over to Mr. Stumpy, times are tough so this is going to have to do.


I want everyone to understand the 925 does run, but will need a litte bit of work, the handlebar holes are stripped and will need helicoil/tapped, the saw will come dressed with a nice Homelite 20inch sprocket tip bar.

I'm just glad to have the opportunity to help someone out. I can't even begin to explain all of the help I have received in my life just because someone wanted to, it's time to pay a little of that forward.

Stumpy I hope that we can help you get your place back together and better than ever man. You were a straight up guy with me in our dealings, and as far as I'm concerned you and your family deserve everything good coming your way.



Chris

Repped.

 

[jockeydeuce]

Hopefully won't have to replace them. However, the PN is 0000 993 0900.

I will be splitting the cases on this saw. So I'll be needing the following.

Case gasket - 1106 029 1210 (Just found an extra in the garage)
Crank Seal x 2 - 9640 003 1980
Tank Vent - 1108 350 5800
Fuel Hose - 1111 358 7700
Fuel Tank Gasket - 1106 359 1110
Piston Rings (Maybe) - 1106 034 3003 - 58x1.5
Exhaust Gasket - 1106 149 0600
Gear Cover Gasket - 1109 649 0500 Probably NLA
Carb Kit for Tilly HL, I think

That should about do it.

EDIT!!!....Two NOS crank seals on the way to you today, Brad......I have a set of rings with that part # on the bin, but they are 58mm x 2.5 wide...:msp_confused:....I see the IPL says 1.5, so these must be for something else.....Sorry, I just noticed the fuel line was a 1113 line stuck in the wrong bin!!

I bought out this old dealer and I'm running into that a lot!!....Seals are still heading your way.

That's all I have in the above stuff.....If there's anything else let me know.:msp_thumbsup:

 

[Work Saw Collector]

Stump I transfered some more.

 

[Carl Anderson]

Wanted to get caught up on this thread during my lunch break, wow! I don't have much to offer but I'm pretty sure I have a foot or two of fuel line and a filter. I think I also have some fuel line for lawn and garden tractor engines (with some of those horrible little spring clips) as well as a new oil filter for a 18 hp Kohler Command v-twin I don't need anymore that should fit many other engines. I might still have a used but working carb for a 8 hp Techemseh snow blower engine, not sure if any of that will be of any help. If I have any extra tools that aren't rusty and trashed or find anything else of use I'll toss them in too. Just need the shipping address in a PM.

I will do a paypal when I can but I just commited to buying a ton of wood pellets for a family at church a couple days ago so I'm a little short right now. If a few others at church decide to chip in for that I may be able to free up some cash for Stumpy sooner rather than later.

I do have an old Homelite VI Super 2 (if I'm reading that right) with case. It's a mess and I'm a little embarassed to even mention it, I'm grasping at straws here because I want to help. I figured if it's worth anything for parts Stumpy can have it. The bar is shot, I found it in my dad's basdement sitting in a case full of water like a pot of Homelite stew so it's pretty well rusted stuck and/or seized. If it's not worth anything I'll just send Stumpy the money I would have spent to ship it to him, don't want to ship him another headache. Someone holler if there is any hope for the poor little Homie.

View attachment 210629
View attachment 210630
View attachment 210631
View attachment 210632

 

[blsnelling]

EDIT!!!....Two NOS crank seals on the way to you today, Brad......I have a set of rings with that part # on the bin, but they are 58mm x 2.5 wide...:msp_confused:....I see the IPL says 1.5, so these must be for something else.....Sorry, I just noticed the fuel line was a 1113 line stuck in the wrong bin!!

I bought out this old dealer and I'm running into that a lot!!....Seals are still heading your way.

That's all I have in the above stuff.....If there's anything else let me know.:msp_thumbsup:

Thank you!!

 

[DSS]

I haven't been a member very long here.But I feel like its one big extended family! :msp_thumbsup:

Plus you're a midget.uttahere2:

 

[Hedgerow]

Sit tight on the poor Homie Carl... Due to the law of diminishing return...:hmm3grin2orange:

 

[Carl Anderson]

Plus you're a midget.uttahere2:

Don't you mean "Little Person"? Don't want the pc police coming after you! :hmm3grin2orange:

 

[Carl Anderson]

Sit tight on the poor Homie Carl... Due to the law of diminishing return...:hmm3grin2orange:

Yeah, I'm thinking the returns on that sad little saw have diminished beyond all recognition at this point but since I don't know that much I figured I'd see what others think. I guess maybe now it's purely "decorative" :biggrin:

 

[tbone75]

Plus you're a midget.uttahere2:

I could sure go for a nice big T-Bone right now ! :hmm3grin2orange: But not sure you would even make good hamburger? To old and tough :hmm3grin2orange: