:msp_rolleyes:
Hey guys, I removed the carburetor and cleaned it took out the jet and looked for obstruction on and cleaned and reinstalled it.
I tried to drain all of the gas back into a gas can and noticed that it stopped flowing, I loosened the gas cap and it started to flow.
So I have vacuum problem in the tank.
I disconnected a hose to the vent on top of the tank it went to some kind of a filter than to the carburetor. This seemed to solve the fuel going to the carburetor problem.
It ran and did not die.
The only carburetor adjustment seems to be is an idol adjustment screw. If I screw it all the way in the engine runs at full throttle, all the way out and it stalls.
The engine still seems to be starved for fuel, when I extend or retract the ram the engine stumbles and wants to stall. This is when the pump is at high volume low pressure.
When the ram slows down to low volume high pressure to push through the round it increased throttle as needed.
I have a 16 gpm pump with an 11hp Harbor Freight Predator motor.
Thanks David