Two of Homelites best in action. Videos

[leeha]

Had a little time today to play with these two Homelites
that i just got up and running. One is a Super 2100, It
needed the right side main case replaced as well as a fuel
system tune up and ignition tune up. Runs pretty good now
but needs a new rim sproket. Has that funky 6 spline drum
and rim. The wood is very hard and it has a semi chisel chain.
It could have done better with full chisel and a 7 pin rim
instead of the 8 pin thats on it.

Next is a 750 i got from a fellow member. it needed a new intake
boot and fuel system tune up. Pulls really good. Has 404 full chisel.

Got them backwards. First vid is the 750.

Lee

 

[watsonr]

That 2100 sounds sweet and it's ripping that log up! Looks to be faster than that 750.... another sweet saw. 750 was sounding a little rich until you lifted up on the handle and put a load on.... maybe you need bigger logs for testing??

Both great saws!

 

[leeha]

That 2100 sounds sweet and it's ripping that log up! Looks to be faster than that 750.... another sweet saw. 750 was sounding a little rich until you lifted up on the handle and put a load on.... maybe you need bigger logs for testing??

Both great saws!

Thanks,
They both seem to run pretty decent. But i'm not
trying to win any races so i tend to run them a tad
on the rich side just to be safe. Bigger wood would
be great but i'm very thankful to get the big wood
that i am able to get.



Lee

 

[watsonr]

i tend to run them a tad
on the rich side just to be safe.
Lee

And with the price of a piston for either, mine run a little fat also!

 

[leeha]

And with the price of a piston for either, mine run a little fat also!

Amen to that, Plus the cost of a cylinder
or to replate one.




Lee

 

[cpr]

Nice 750. Have to get one one day, but that 2100... sounded great, runs great, and has "the look". Reed ported saws. Does it every time I tell ya.

I gotta go take care of somethin', lol!

 

[leeha]

Thanks Charles,
Now you go take care of that somethin, :msp_rolleyes:





Lee

 

[watsonr]

Thanks Charles,
Now you go take care of that somethin, :msp_rolleyes:

Lee

Put up a video of that 9-26 and I believe it'll take care of itself!!

 

[leed3349]

Put up a video of that 9-26 and I believe it'll take care of itself!!

wow you always have nice saws lee

 

[sawfun9]

Thanks Lee, that's a matchup I've been wanting to see for a while. Old school torque vs new school rpm. both saws by the same manufacturer and within a couple of cc's. Oh and congrats on the big haul.

 

[Bill G]

Another excellent video of the excellent Homelite saws

 

[leeha]

Thanks Bill,
Today i want to do the Mac 797 and SP125 if i have time.




Lee

 

[Ambull]

Badazz 2100 for sure. Just purring away....

Thanks for the vids!!