shorthunter
ArboristSite Guru
I am looking for a little advice on a walbro carb that I have modified for fitment. The carb in question will not feed the saw enough fuel. It seems to feed the saw plenty of air but I am almost three turns out on the high speed screw and I cannot get the saw to four stroke for an extended period of time
Could be a vacuum issue or it could be as simple as drilling out the carb. Right now the saw will run pig rich for 3-4 seconds before the rpms start to climb. Within another 3-4 seconds the saw will be screaming like the toddler you saw in Walmart yesterday
Could be a vacuum issue or it could be as simple as drilling out the carb. Right now the saw will run pig rich for 3-4 seconds before the rpms start to climb. Within another 3-4 seconds the saw will be screaming like the toddler you saw in Walmart yesterday