Mastermind Worksaws
The Enabler
I cut it square with the bore. No taper at all. I like to imagine that it helps increase squish velocity to be flat like that.
What's On Your Bench In 2018 ?????
- Thread starter Mastermind Worksaws
- Start date
Help Support Arborist Forum:
I cut it square with the bore. No taper at all. I like to imagine that it helps increase squish velocity to be flat like that.
- Joined
- Feb 17, 2009
- Messages
- 16,693
- Reaction score
- 15,929
- Location
- Beautiful Rockbound Coast of Maine
Hey Randy.......nothing to say....just hey!!.....I know...pitiful.....(in my best 'Nadian accent).....Sooorry....eh??
nighthunter
addicted to arboristsite
A black top 61 that needs a 272xp top end but does anyone know if i can use the original coil fr
Mastermind Worksaws
The Enabler
Hello Robin. Good to read you my friend. Hope you're all staying warm.
Coil should be just fine.
We all love pictures.
nighthunter
addicted to arboristsite
I will when i get a meteor top end with a bit of port work and a timing advance it should make a pretty decent saw
Mastermind Worksaws
The Enabler
Yes sir. They are great saws. You'll love it.
- Joined
- Dec 4, 2016
- Messages
- 1,815
- Reaction score
- 2,780
Coil should be fine but you may have to install a longer HT wire to reach the spark plug on the 272 cylinder
SierraMtns
ArboristSite Operative
Nothing exciting here Randy. Just porting one of those nasty X-Torq saws.
You know they don't take to kindly to porting.
You know they don't take to kindly to porting.
Mastermind Worksaws
The Enabler
Nothing exciting here Randy. Just porting one of those nasty X-Torq saws.
You know they don't take to kindly to porting.
View attachment 625918
They turn on up pretty good.
I still like the 50mm OE better though.
James Miller
Addicted to ArboristSite
Its not much but this abused cs 310 followed me home. After a good cleaning and cat delete its not a bad saw.
sunfish
Fish Head
@Mastermind Worksaws Randy, I've been running that 357xp you did up and it's a lil' monster! Way impressive!!!
Thank you!
Thank you!
RIDE-RED 350r
No wing, no prayer
Uh-OH! 357 ****!
cuinrearview
Red saw lover
Beautiful Don. Is that at 18" bar you run on that? I've been thinking of going to an 18" on my T4driller 2159 for more chip throwing fun.@Mastermind Worksaws Randy, I've been running that 357xp you did up and it's a lil' monster! Way impressive!!!
Thank you!
in response to original title...
the same mess that was there in 2016, a bunch of dead cylinders, a t400 parts saw, an 044 I'm supposed to get running for a friend, buy haven't had time, whats left of a roached 064 (its very very bad) and my pile of shame from all the replaced parts on saws I've run over.
the same mess that was there in 2016, a bunch of dead cylinders, a t400 parts saw, an 044 I'm supposed to get running for a friend, buy haven't had time, whats left of a roached 064 (its very very bad) and my pile of shame from all the replaced parts on saws I've run over.
sunfish
Fish Head
Yes, it's 18", 3/8, .058.
nighthunter
addicted to arboristsite
thats rough but at least he died doing what he loved
I kinda want a 288. Working on a 55 today. Suddenly won’t run right after cleaning the air filter. Leaning out. Wtf. Still has limiter caps. Gonna do away with those first. Filter hadn’t been cleaned or checked in like a year.... yeah it’s mine
Mastermind Worksaws
The Enabler
I'm finally on a new batch. 16 saws leaving here today via FedEx.
Pics soon.....
Pics soon.....
- Joined
- Dec 4, 2016
- Messages
- 1,815
- Reaction score
- 2,780
Wow that's a lot of work. I don't know how you do it.
