romad10
Recon Observe Mark And Destroy
hey guys.. thought I would throw this out there.. which carb if you could have on the saw.
I have a 1999 saw with 283 EPA carb...
anyone know what the internal difference were? I see that the needles are different part numbers.
EPA Tillotson 283:
503 98 83-01 needle (Low)
503 98 86-01 needle (High)
NON Tillotson EPA 228C
503 59 95-01 needle (High)
501 26 85-01 needle (Low)
I know that "EPA" Automatically = restrictive and garbage but it might not be the case this time around.
I do know that there are no limiters on the carb.
I always hug trees.. right before I cut them up...
I have a 1999 saw with 283 EPA carb...
anyone know what the internal difference were? I see that the needles are different part numbers.
EPA Tillotson 283:
503 98 83-01 needle (Low)
503 98 86-01 needle (High)
NON Tillotson EPA 228C
503 59 95-01 needle (High)
501 26 85-01 needle (Low)
I know that "EPA" Automatically = restrictive and garbage but it might not be the case this time around.
I do know that there are no limiters on the carb.
I always hug trees.. right before I cut them up...