Wigglesworth Charity Drive

Advertise with us
Wesspur
Shop deals on ebay
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
blsnelling said:
Admins, please leave this in the chainsaw forum for 2 weeks. At that time, the sticky can be removed. Thanks!

I've got that hard beating heart in my chest kind of feeling right now, telling me I need to do something. Jeremy is not just one of our own, but I consider him a personal friend. The card's he's been dealt right now are pretty tough. He's already told us that he will be going to 60% of his normal pay. That was effective immediately as of last Tuesday. I don't mean to embarrass you Jeremy, but I want to help. I'm sure there are many more here that do as well. I'm going to provide that opportunity.

I have a MS460 work saw here that I was going to rebuild and sell. Instead, I'd like to give the profits to Jeremy and his family.

If you would like to donate to this charity drive, please send donations in $10 increments to [email protected]. All proceeds above $250 will be donated. When this drive is over, I will draw one name, to which I will give the chainsaw.

This drive will only be two weeks in duration. I want to get this money to Jeremy sooner, rather than later. The deadline will be Monday, May 7th, at 7 PM Eastern time.

This particular MS460 is not a pretty shelf queen. She's a well worn work saw, with plenty of scrapes and scratches. It currently runs, but has bad crank bearings. I will be going through it entirely. Both crank bearings will be replaced, as well as all seals and gaskets. If need be, I will replace the piston, and or rings. Everything will be cleaned and put back together to make a solid work saw. I will get pics when possible. Any questions, please ask.

All donations MUST have your AS username included. Please send all donations as a gift.

Please make no references to p a y p a l. Please do not call this a r a f f l e. This is for legal reasons.
Click to expand...

paypal keeps telling me this isn't a valid address. ?
 
Wigglesworth? Never heard of it. Is it like a Dingleberry? :msp_confused:

Oh well, must be a good guy. Donation sent. :D

Brad, if you need any parts, give me a shout. I believe I have an extra set of the large spikes, a large clutch cover and maybe a 3/4 wrap that I'd donate to the Wigglers cause. :rock:
 
Last edited:
I just found this thread and gave J a call. He's blown away by the generosity of you fellers.

What a great bunch we have here......I'm proud to be a member.
 
It's threads like this that make me proud to be a member here, and it's what makes this the best place to hang out. In for what I could now, hopefully a little more on payday!

Thank you Brad for doing this!
 
blsnelling said:
Admins, please leave this in the chainsaw forum for 2 weeks. At that time, the sticky can be removed. Thanks!

I've got that hard beating heart in my chest kind of feeling right now, telling me I need to do something. Jeremy is not just one of our own, but I consider him a personal friend. The card's he's been dealt right now are pretty tough. He's already told us that he will be going to 60% of his normal pay. That was effective immediately as of last Tuesday. I don't mean to embarrass you Jeremy, but I want to help. I'm sure there are many more here that do as well. I'm going to provide that opportunity.

I have a MS460 work saw here that I was going to rebuild and sell. Instead, I'd like to give the profits to Jeremy and his family.

If you would like to donate to this charity drive, please send donations in $10 increments to [email protected]. All proceeds above $250 will be donated. When this drive is over, I will draw one name, to which I will give the chainsaw.

This drive will only be two weeks in duration. I want to get this money to Jeremy sooner, rather than later. The deadline will be Monday, May 7th, at 7 PM Eastern time.

This particular MS460 is not a pretty shelf queen. She's a well worn work saw, with plenty of scrapes and scratches. It currently runs, but has bad crank bearings. I will be going through it entirely. Both crank bearings will be replaced, as well as all seals and gaskets. If need be, I will replace the piston, and or rings. Everything will be cleaned and put back together to make a solid work saw. I will get pics when possible. Any questions, please ask.

All donations MUST have your AS username included. Please send all donations as a gift.

Please make no references to p a y p a l. Please do not call this a r a f f l e. This is for legal reasons.
Click to expand...

Just bringing the info to the current page, for those reading the end of the thread. Brad said pics in a day or two. :rock:

Edit: wiggs is one of our own jump in here if you can.
 
Good morning guys.

It's been a rough mornin here. Chillin on muh ice pack, waitin for the meds to kick in. The hiccups are a killer I tell ya...

Thank u guys once again. My wife read the whole thread last night, and was literaly brought to tears. Words cannot express our thankfulness. BTW, She actually signed up last night. :)

Be lookin for Mrs. J. :)

I wish I were more eloquent in speach, but I'm not. Lol.

Thank u guys again. Thank u so much.

J
 

Similar threads

D
Jonsered 2152 complete rebuild question
Replies
8
Views
644
huskihl
huskihl
Gomofast
Help MS 311 won't run right after rebuild
2
Replies
23
Views
1K
lone wolf
lone wolf
northwest saws
Want to Sell Stihl MS460 New Oem Crankcase
Replies
2
Views
764
WestAussie
W
Patrick62
frankensaw went lean...
Replies
5
Views
296
stihltech
stihltech
bigv
Want to Buy Dolmar or Makita Saw: 6100, 6300, 6400, 7300, 7900
Replies
3
Views
482
Lightning Performance
Lightning Performance

Latest posts

Back
Top